I picked up a big block recently and it came with a twin points Mallory Distributer! Looks great, but I have no experience with these fellas. Anyone on here have anything to say about them?
cheers, josh
ive got to say ive only heard bad things about the recent mallorys. it was something about quality control
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
Hi
They weren't too bad in the old days but they did have some issues.
They had adjustable advance, that could move and causing over advancing
The twin pints can be hard to set up correctly, we use to do it in a dizzy graph
The parts can be hard to source, not good if your out in the country.
Steve
My brother ran one in his circuit ski race boat. It was a complete pain in the &rse.
Put something sensible like an MSD dizzie on it Josh.
it needs to go in the large re cycle bin in the corner
yep parts are impossible to find
better off with a new 009
not to bad , just set the points like in the old datsun 200b no big deal.
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
Yep, nothin good to say,Ran a Accel one on a 351 for a while. Points started to get way expensive and tuning took twice as long. Ebay it and let someone else worry about it.
thanks guys, you rock!
will shelf it
Totally disagree, I have been running two twin point dist's now for years one draging my little 1776 to a best of 14.01 and the other on a 1600 street car . you can set the max advance and the best of all they don't burn points. The points rotor and condensor are easy to get and they are stocked here in australia.
If you don't want this dist PM me with a price
Yep what he said.
Ive been using one on my vee engine for years. NEVER has the advance adjust moved. Most serious thing to ever happen was one of the point contacts dropped off. Never mind, it just keeps running on the other set!
Twin points are a cinch to set up and parts are easy to source.
You can use feeler guages easily as the points are set very wide at .020" or so or you just use a dwell meter and place some thin cardboard inbetween one set of points and adjust the other and vice versa.
Nice thing with mallory accell and so-on brands which use the same dizzie castings is that most parts are common across the vast majprity of 4 cylinder dizzies. Same goes for 6 and 8 cylinder jobbies.
Echlin still make the points sets as well as genuine mallory but genuine stuff is a bit exxie.
Condensers are generic.
Use it. Youll never regret it! Ill put second dibs on it after frosty if you decide to unload it!!!
L8r
E
Im not a complete idiot, quite a few parts are missing....
I was talking with some ol skool race guys over the weekend that used to run them on hill climb vehicles! they loved em, but I think I might just settle for the 'ol 009. I will sell this for what one of the guys said it was worth
$100. In good cond!
can send if needed!
cheers
josh
