Traction bar.....

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 · 12 Dec 2010, 6:05 pm

#816664

Right, so i've decided to give the stock 1500 swinger gearbox a go in my budget drag car project.... Now i'm trying to figure out how i'm gonna give that gearbox the longest possible life i can, It will be solid mounted with the intermediate mount from CIP1 and the rear solid mount also, I will be fabricating something like a kafer cup bar but it will basically be 1"rhs tieing the frame horns to the shock towers, Now the question is: i have been looking at these traction bars that support the rear of the engine to stop wheel hop.... They say it supports the engine when it tries to push down with tourqe....
http://www.thesamba.com/vw/classifieds/detail.php?id=750488

Does this seem like something usefull? or will all the other stuff be enough?

thanks
Mick.

Smiley Veteran Volks Folk

2,125 posts · joined Oct 2008 · 12 Dec 2010, 6:17 pm

#816666

Andrew Westwood was running one of these on his Rat Racer drag car at Warwick this year. Might want to flick Oztowdster a PM and ask him about it if you want details.

Smiley 😎

If you said I was a Volkswagen man, you'd be right.

HappyDaze Superannuated

2,887 posts · joined Jun 2009 · 12 Dec 2010, 6:19 pm

#816667

The 'other stuff' (done right) should be enough - spend your hard-earned on something useful.

I'd rather wear a Beetle out by racing it than by polishing it!

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 12 Dec 2010, 7:39 pm

#816683

Hi

I've never liked those units that Berg used. I feel that they put too much force in a weak part of the body. The price is bit rich for a length of 25 mm square tube and some threaded rod and nuts.

On my sons bug we used a 3 bar Kafer cup setup with a Berg style front mount, he ran at Warwick in 2008 & 2009 without any issues.

I needed to make similar Kafer cup bar for my bug, I bought 6 x 3/8 rose joints with weld in slugs from eBay UK for about $65 and 2 metres of 3/4 ID moly tube for $50, so with a bit of cutting and welding I made a Kafer cup bar for around $115.

Steve

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 · 12 Dec 2010, 8:29 pm

#816690

You are right, the price is a bit rich but i was planning on making something up myself, What engine and gearbox combo where you using in your sons car Steve?

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 12 Dec 2010, 8:40 pm

#816691

Hi

It ran a stock 3.88 IRS box, 1904 cc, he won his bracket in 2009.

Styeve

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 12 Dec 2010, 9:36 pm

#816703

As above, do the other stuff properly and it's not required, that thin wall tube wouldn't do much anyway, and worst part is the body fatigues and cracks from the load. I've seen a car (won't mention names) where nearly every spotweld had popped around the firewall and the whole tail/apron was good to support nothing.

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE