Skip to content
Aussieveedubbers

Who can recomend a good fuel pump

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

ByronBug High Priestess of Unequaled Coolness & Flower Child

1,446 posts · joined Sep 2002 ·

#824035
I have broken down a few times always having the same problem.....
the little pin keeps falling out of the fuel pump... 🙁
Can anyone recomend a :
better quality fuel pump that this doesn't happen with or
a way to solve this ?
Judy
59 Microbus Kombi (MERCY)
64 Microbus Kombi (CHANNON)



65standard Officially Full-On Dubber

373 posts · joined Apr 2009 ·

#824036
ByronBug wrote:I have broken down a few times always having the same problem.....
the little pin keeps falling out of the fuel pump... 🙁
Can anyone recomend a :
better quality fuel pump that this doesn't happen with or
a way to solve this ?
Judy
Are you talking about the pivot pin for the rocker arm between the push rod and the diaphragm for the standard type fuel pump?

If so, you have either lost the lock tab from either end, or you have one badly worn fuel pump body/pivot pin.

If you can find a good second hand pump body and put a kit through it or just buy a brand new sealed unit for about $60-$70.

Hope this helps.
If it ain't broke, fix it till it is!

ByronBug High Priestess of Unequaled Coolness & Flower Child

1,446 posts · joined Sep 2002 ·

#824060

Yes its the pivot pin...It was a brand new sealed unit 2 weeks old that doesn't have surclips...its a brazillia brand (bought from George at classic veedub)
I've bought 2 before this one & the same thing keeps happening...
59 Microbus Kombi (MERCY)
64 Microbus Kombi (CHANNON)



Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#824070
65standard wrote:If so, you have either lost the lock tab from either end, or you have one badly worn fuel pump body/pivot pin.
the shitty brazillian pumps out these days have no circlips to start with and as a result the pins often work their way out

I think I've got a couple of dead German pumps which have the pivot pins with the circlips on either end so they dont fall out.

I'll see if I can find one.

HerbieBoy82 Cool....

128 posts · joined May 2006 ·

#824074
ByronBug wrote:I have broken down a few times always having the same problem.....
the little pin keeps falling out of the fuel pump... 🙁
Can anyone recomend a :
better quality fuel pump that this doesn't happen with or
a way to solve this ?
Judy
The same thing happened to me about 5yrs ago in the middle of The Herbie Parade at Lismore & had to push it for the last few hundred metres. I'll try to find out what my mechanic did to it, cos it's still same pump.
Brendan.

ByronBug High Priestess of Unequaled Coolness & Flower Child

1,446 posts · joined Sep 2002 ·

#824080
Thanks Guys...Its happening too many times now...& too many pumps I am going through....
59 Microbus Kombi (MERCY)
64 Microbus Kombi (CHANNON)



65standard Officially Full-On Dubber

373 posts · joined Apr 2009 ·

#824081
I don't know if the old pins will fit the new pumps, due to the length of the pins and the thickness of the casting.

You could try peening the casting at the end of the pin, or at worst case scenario, araldite the pin to the body. This will not affect the rocker arm operation.
If it ain't broke, fix it till it is!

65standard Officially Full-On Dubber

373 posts · joined Apr 2009 ·

#824085
If you get really stuck, i do have a couple of spare pumps that I have rebuilt that you can have. I have the slip-on type fitting pump. They have been tested and work fine.
If it ain't broke, fix it till it is!

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#824092
if its a beetle pump, just buy a sealed one with out the holes in the side , I never had a problem.


😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

Turbo66 Casual Dubber

41 posts · joined Jan 2010 ·

#824104
why dont you put a little 12v electric pump in it. that WILL be the end of all your problems. no moving parts to wear, pump is out of the engine bay, never suffer from vapour lock again. do it once and forget about it.

ByronBug High Priestess of Unequaled Coolness & Flower Child

1,446 posts · joined Sep 2002 ·

#824169
Ian were did you buy that one from?
59 Microbus Kombi (MERCY)
64 Microbus Kombi (CHANNON)



ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#824200
I think it come from classic veedub, about $40
its one of those dressy chrome ones
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#824229
Turbo66 wrote:why dont you put a little 12v electric pump in it. that WILL be the end of all your problems. no moving parts to wear, pump is out of the engine bay, never suffer from vapour lock again. do it once and forget about it.
Why over complicate things? there's no reason to run an electric pump on a stock motor, a stock pump will even keep IDAs fed.

If you get vapor lock with stock pumps you got other problems.

Aside from being noisy, they need an electrical saftey cut out so they don't burn you alive in an accident, some carbs are real finicky about the pressure they put out which then requires a regulator and most styles like facet ones dont stop the fuel flow when off so if you park up hill theres a possibilty of a sump full of fuel if the needle and seat are bit iffy

ByronBug High Priestess of Unequaled Coolness & Flower Child

1,446 posts · joined Sep 2002 ·

#824302
rang around & found alot of VW shops sell this particular fuel pump "Brazilica" brand I think its called or similar name (this is the one we are having all the problems with)...we phoned vintage vee dub & they stock another type....so have bought that one....hopefully that will put an end to all this.
59 Microbus Kombi (MERCY)
64 Microbus Kombi (CHANNON)