vwrallycar Insano Dub Head
721 posts · joined Sep 2002 ·
Hi, is there anyone out there running kadrons, but not using the stock linkage? I have seen a berg kit. is there a better alternative to the stock linkage?
Kadron carbs
sander288 "Bolt-on Master"
1,404 posts · joined Aug 2008 ·
vwrallycar Insano Dub Head
721 posts · joined Sep 2002 ·
this actually looks quite nice
sander288 "Bolt-on Master"
1,404 posts · joined Aug 2008 ·
Made by ze Germans no less
Gracey Wolfsburg Wizard
511 posts · joined Feb 2003 ·
I use the CSP linkage on webers, and it's a quality product. I'd never go back to crossbar linkage.
I haven't used it on Kadrons but I imagine it'd be just as good as the weber version.
I haven't used it on Kadrons but I imagine it'd be just as good as the weber version.
cesiumfrog Seriously Crusin Dubber
161 posts · joined Apr 2005 ·
i have the one a j simms/mr kadron/ low bugget/whatever sells, i think it is scat or looks the same and it works really well
for about $50-60
for about $50-60
SuperOwen Fahrvergnugen
868 posts · joined Jan 2009 ·
Scat linkage is good value for money and works well. I have heard since having a car with kads that an excellnt setup is to just upgrade the stock ends that click on to the carbs with units from a 70's merc etc from the wreckers. I think the stuff that came with CIS injection. They clip on really strong apparently and the stock linkage is fine after that.
Johnnie B Learner Dubber
13 posts · joined Mar 2011 ·
Whats wrong with the stock linkage? I've never had a problem with them
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
The ends pop easily apparently - the ball clip??
I have never had a problem - but that is because I have only ever run Webers and Dells
I have never had a problem - but that is because I have only ever run Webers and Dells
Futue te ipsum!!!
beetleboyjeff Custom Title Time!
1,790 posts · joined Feb 2009 ·
Mine used to pop off occasionly (usually on a rough road), but a few years ago, Peter Richards got me a different retaining clip (a lot stronger), and I haven't had a problem since.
From your ole' mate Jeff
vwrallycar Insano Dub Head
721 posts · joined Sep 2002 ·
my linkage has been modified at some stage, ( before i bought them), and makes setup of them very hard to get right. have used the stock linkage on previous sets without issues.
does anyone sell the csp linkage here in Australia?
does anyone sell the csp linkage here in Australia?
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
Dont believe sovwrallycar wrote:does anyone sell the csp linkage here in Australia?
Vollks has some CSP stuff and pretty sure VVDS does some as well
Mainly shifters though
The way the $$ is you might be better off just buying off them
Vee dub parts unlimted have them
http://www.vwparts.net/CSP129941110KAD.html
Futue te ipsum!!!