Hi guys,
i have just picked up an 009 mech dizzy (yes i read the posts on them AFTER i purchased it, Doh!).
as i was having some advance problems with the original one (30+ years old nd never serviced) ill use the 009 till i get the bosch German one fully worked over nd up to spec.
so anyway, taking the old dizzy off and putting the 009 on. the 009 has a black and a red wire as the old dizzy just had a green wire going into the points.
i have connected the black wire to the points connection (where the green wire sat) but does the red wire go to the other terminal on the coil? (opposite side to the black wire).
i got the blue plazmex coil to suit in the original purchase of the dizzy.
ive got a "66 T1 with a warmed up 1600, fly cut heads, a 30yr old weber carb which is still good and empi tuck away system.
any help with the location of the red wire as i dont want to hook it up wrong and be in a worse situation than when i started to "fix it up" 😂
ducati 1100 Casual Dubber
38 posts · joined Feb 2011 ·
1966 1300 Beetle, 12v conversion- 1600 rat.🤪
