Skip to content
Aussieveedubbers

Tyres for my Fuchs

0 likes
Share Share on Facebook Share on X Share on Reddit

OldTimer Seriously Crusin Dubber

199 posts · joined May 2009 ·

#839717
Hey Guys and Gals,

So I got a set of Fuchs - the fronts are 4.5 inch x 15, and the rears are 5.5 inch x 15. Now I want tyres.

Any advice on what size is best for the 4.5 inch ones? I'm not worried about the rears as 5.5 inches are easy to source.

I've got no idea what size is best for the fronts . . . and advice would be appreciated.

Cheers,

Old Timer
air is cool, but air-cooled is cooler!
1967 Aussie Built Type 1 1915 Deluxe

zayus Wolfsburg Wizard

437 posts · joined Sep 2002 ·

#839739
Hello,

A 165/65/15 would work on 4.5 inch Fuchs.
A 155/65/15 would fit the rim even better, less sidewall bulge.
A 145/65/15, fits too.

I am researching tyres @ the moment too, I have checked the Hankook tyre site - http://www.hankooktyre.com.au/iDrive/

EG: Hankook Optimo K415 or Optimo K715

Hankook, make several narrow 15 inch tyres, that will suit a 4.5 inch Fuchs.
I have no idea, how good Hankooks are, but some guys here on the forum use Hankooks.

I am tyre snob, so I am looking for Japanese or Euro tyres! 🙂

aircooled10 Learner Dubber

14 posts · joined Apr 2010 ·

#839874
Hi Old Timer.

Your post caught my attention.not because of the tyre question but because of the fuchs.I have been plannning on getting a set in the same measurements but have hesitated because there have been some issues with the wheel nut seat surface on some brands.Traditionallly they should have a ball seat wheel nut and seat type fitting surface.
Are you able to tell me what your wheels are like and if you bought them here or overseas? Thanks.

By the way I have used Hankook tyres on my 1 tonne ute and the quality was very good.

OldTimer Seriously Crusin Dubber

199 posts · joined May 2009 ·

#840133
Hi aircooled10,

Yes I know about the wheel nut seat problem - and I thought that I had that problem, but eventually got the right wheel nuts through Vollks.com.
Wazza was helpful and checked that the nuts he had fitted properly before he sold them to me. He sells the same wheels I already had.
I actually got the wheels through Mick Motors (special order from EMPI), and as I've said, the nuts from Vollks.com. So far so good.

Thanks for the tyre comment, I think I'll give them a go.

Cheers,

Old Timer
air is cool, but air-cooled is cooler!
1967 Aussie Built Type 1 1915 Deluxe

h fractals - an ever changing lifestyle

7,671 posts · joined Feb 2005 ·

#840155
fronts either 135 or 145/15 nankang - fit like a hand in a glove n go good
fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com

Z = Z2 + C1/r = 1/0 = infinity

Barrels www.barrelman.com.au

VW Workshop - aircooledgarage.com.au
allcooled.com.au

aircooled10 Learner Dubber

14 posts · joined Apr 2010 ·

#840180
Hi Old Timer.

Good to hear that you do have the correct wheel nuts.I spoke to Rohan at Micks' about this problem on the Empi Fuchs.I see that you purchased 5.5 for the fronts,that's what I plan to use(better wheel clearance).Volks.com advertise 15.5 only as a set.What did you do to get the 4.5s'?Thanks.

OldTimer Seriously Crusin Dubber

199 posts · joined May 2009 ·

#840201
hey aircooled
Got the following from Micks (Rohan actually - nice guy).
Was lucky enough to get in on their next container order - Rohan ordered them especially for me.

2 x 4.5 (Front)
2 x 5.5 (Rear)

Yes Vollks only advertise the 5.5 wheels, but Wazza will get 4.5 in if you want them. Don't know price or how long they'll take to get. Maybe CIP1 can help?

hey mr bungle
So they're no good? Why? And what brand would you suggest instead?

Old Timer
air is cool, but air-cooled is cooler!
1967 Aussie Built Type 1 1915 Deluxe

OldTimer Seriously Crusin Dubber

199 posts · joined May 2009 ·

#840203
Whoops! I read your post as saying "no good" instead of "go good" 😊😊😊

As my name says, I'm old. Forgive me.

Old Timer
air is cool, but air-cooled is cooler!
1967 Aussie Built Type 1 1915 Deluxe

aircooled10 Learner Dubber

14 posts · joined Apr 2010 ·

#840254
No problems Old Timer,yeah I was waiting for their(for those who use the incorrect word, 'there', take note!) next shipment also.

Aircooled10.