Skip to content
Aussieveedubbers

Oil Temp Gauge

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#847112
i have an oil temp gauge that has never worked, earthed the cable at the sender end and it causes the gauge needle to swing to the other end of the gauge so I assumed that the sender is faulty, bought a new sender and still no go, it is in a buggy, any clues?
Thanks
Don
I dream of a day when a chicken can cross a road without being asked for it's motive!

66brm Seriously Crusin Dubber

140 posts · joined Nov 2009 ·

#847242
The gauge and the sender need to be matched, the sender normally has its range stamped on it.

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#847251
Done, that's what has me thrown, I took the gauge (VDO) in and got a sender to suit. 🙄
I dream of a day when a chicken can cross a road without being asked for it's motive!

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#847289
Where have you got the sender mounted?

If it's in the sump plate it probably works fine, they just don't get much of a reading there.
When I tried one there in winter after 20 mins driving the needle still hadn't moved.

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#847308
donn wrote:i have an oil temp gauge that has never worked, earthed the cable at the sender end and it causes the gauge needle to swing to the other end of the gauge so I assumed that the sender is faulty, bought a new sender and still no go, it is in a buggy, any clues?
Thanks
Don
where is Your sender Don..?
Mine is in the type 3 dipstick plate... Works great..
needle doesn't move until I get out of town on the highway usually... in this weather its around 80C using either gauge
150C or the 120C... lol

remember the oil relief valve doesn't open until the oil gets HOT...
I have a different problem.. oil pressure gauge and sender...
and have use different senders... always full scale...
I'm going to bench test them, and see what happens...

cheers

LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

donn Wolfsburg Elder

3,515 posts · joined Nov 2005 ·

#847356
The wench has a droped sump with external oil filter, the sensor is at the back of the sump near the filter, oil temp did not move at all on the mid winter wander yesterday. 🙅
I dream of a day when a chicken can cross a road without being asked for it's motive!