Skip to content
Aussieveedubbers

VW Safari Bodywork good welder/fabricator needed!

0 likes
Share Share on Facebook Share on X Share on Reddit

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#847433
Hi all,

I am in Brisbane and have pulled apart my 1976 VW Safari ... I am replacing the floor pans and both rocker panels left and right, inside and out and I would love to hear from anyone who is good at doing the welding etc for me!
The guy I have looking after my car is not a VW specialist and is severly dragging his feet ... the VW deserves better ... I have all the parts brand new from the US .. if I could get a number or a contact it would be very much appreciated !

Cheers
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#847454
I neglected to mention that I have all the new parts ... floor pans, rocker covers ......down to the bolts and fender welts etc ...it is ready to go!
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"

STIDUB Over it.

1,497 posts · joined Jun 2008 ·

#847603
quality repair sections or cheap brazillian/mexican junk?
where abouts in brissy...
Volkswagen Drivers Club of Queensland - member 🙂

STIDUB - yep its still a work in progress

Vwdcq club car racing/ and crashing while my bug isn't finished.

The above are personal views, no more, no less

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#847626
Sorry I don't understand what you mean bu cheap brazilian /mexican junk ...as you would know the 182 were primarily built in Mexico ...does that make them all junk?
The repalcement parts I bought from The Thing Shop in Arizona ..they have both Brazilian/Mexican and parts that they have had manufactured ... the floor pans are theirs ... the rocker panels are not ...check out their website if you need to verify this.

I am sorry, I am not asking for freebies or wasting anyone's time on a "cheap"
Mexican/Brazilian vehicle, all I am asking for is someone who is capable of doing quality work for quality money
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#848788
Thanks Matt Berry for your kind and considerate advice ....... I will be in touch in the near future as it appears that things may be mving for me!
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"

STIDUB Over it.

1,497 posts · joined Jun 2008 ·

#848795
just previous experience with repair sections varying heavily in quality/accuracy thats all, you spend double the time reworking a terribly made panel that was cheap instead of the more expensive/more accurate ones being almost right to weld on, basically adding alot more time & frustration to the job, taking away the appeal of doing it.
give it a few years more experience & adding a mig to my tig & i would of asked for more details - especially when theres quality money involved 👍
an old workmate of mine, sheetie/fab guy is now working for himself in brissy, lives around archerfield if you need someone whos got the extra years experience i dont quite possess
-to put it lightly, if anything at work needed welding other than super super super huge stuff, this guy was the one to ask
Volkswagen Drivers Club of Queensland - member 🙂

STIDUB - yep its still a work in progress

Vwdcq club car racing/ and crashing while my bug isn't finished.

The above are personal views, no more, no less

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#848800
Thanks for the advice ....perhaps I should have said something like this ..... the rocker panels are rusted beyond repair ..the engineer was able to put his size 20 mitts through the rust holes that were so nicely bogged up ...... the floor pans had sheet metal welded in onto the original remains of the floor pans .... the work was Ok but the support was not there ...so .. on advice from the engineer I sourced quality floor pans and rocker covers from the US and have them waiting to be put in.
It is true that you can spend lots of money reworking bad parts and to this end I have sone as much research as I can to source the best quality available without going mad .... I hope this helps and I would love to have a chat with your friend if he is available ....cheers
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"

Yogie Moderator Custom Title Time!

1,608 posts · joined Jun 2003 ·

#848842
You could contact Guru on here as well. Not sure how busy or interested he is in doing extra work but you could ask.

Yogie

gerggl Wolfsburg Wizard

447 posts · joined Sep 2010 ·

#848961
Thanks Yogi et al ...I am at the crossroads with the car and I will need to make an informed decision later today on what to do ...... will keep all updated!

Cheers
Greg Gordon-Lane

Brisbane


Vw's are part of life's journey .... get on board!

VW Safari / Thing 1976 - "A work in progress"

Ducati St4s - "Poetry in motion"