I'm currently on the magical quest of finding a keyed to like set of door handles. I've found a set on the internet, but shipping from the states is huge!
And then I thought to myself, the ignition barrel will need to be replaced too with a keyed to like lock, the same as the door handles. So yes, I think I am dreaming to find these online.
So, do I put a WTB up in the Buying, Selling and Swapping parts section or do I continue to hunt for something that will no doubt not come? 🙁
I wonder if anyone on here has everything keyed to like, I doubt anyone still has the original door handles, ignition barrel and keys to match...
I sold a set a few months ago with ignition, doors, engine lid and original VW key for $100, so they are out there
Alternatively a good locksmith should be able to re-key your existing ones to work off the same key. You just need to find a set with the same prefix keycode
Just specify the year of your car in the wanted ad.
Cheers
Steve
It would probably surprise you how many still have all original locks and handles.
Nearly all of mine have, even my Lbug with over half a million KMs on it now had both original door handles and original Ignition barrel. not only that even factory keys with the code stamped on them.
Decklid latch was a dealer fitted one though so key didnt match.
Its mainly ignition barrels the get worn out from people having huge bunches of keys swinging off them or door handles that break and people dont realise how easy it is to swap the barrel.
If you can get the code to your key (on the side of the barrel when you remove it) any good lock smith can rekey the door barrels to match.
I used to do alittle bit of it but my tumbler wafer collection is running bit low.
I'll check, think I have a set depending on your model. Buy Swap and Sell is the best place though.
I dream of a day when a chicken can cross a road without being asked for it's motive!
Just put the year in the WTB topic.
I'll see if I can do that with the locksmith however, I'll have to find a good one locally.
Unless someone does have a complete set that I can just rip out my old ones and put the new set on.
Would be a good little job anyway, replacing all the bits.
My decklid is also a different key, might add that to the WTB topic.
Joel wrote:It would probably surprise you how many still have all original locks and handles.
Nearly all of mine have, even my Lbug with over half a million KMs on it now had both original door handles and original Ignition barrel. not only that even factory keys with the code stamped on them.
Decklid latch was a dealer fitted one though so key didnt match.
Its mainly ignition barrels the get worn out from people having huge bunches of keys swinging off them or door handles that break and people dont realise how easy it is to swap the barrel.
If you can get the code to your key (on the side of the barrel when you remove it) any good lock smith can rekey the door barrels to match.
I used to do alittle bit of it but my tumbler wafer collection is running bit low.
my notch is 1 key car but I am currently rebuilding my ignition tumbler. Tumbler itself is great condition just some of the wafers are damaged and same with some of the wafer springs.
atm I am buying a few nos door barrels to steal wafers from.
after i am done with that i will get nos huf keys cut to the code.
😵💫
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
vlad01 wrote:Tumbler itself is great condition just some of the wafers are damaged and same with some of the wafer springs.
Your lucky thats all thats happened.
What I've found is usually the case heavy keys bouncing on the tumbler flog out its bore in the barrel so it gets all sloppy and eventually wont turn the switch fully.
That and the tab/tongue part gets twisted from people being forceful with the key.
Interesting though, I;ve never come across damaged wafers.
A few worn ones but thats it.
I keep the door handles and igntion barrels from every car I wreck for the wafers.
The later ignition barrels have more wafers in them than the doors or earlier ones
we got two new door handles and keys $100 plus $16 USA post
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
Our Beetle had all original keys and barrels all around, including original key with code number.
I had to replace ign barrel due to wear, and a locksmith cut a new new key from the code number, and made the ign barrel with new wafers.
He said as long as you cut any replacement keys from the new new key that is cut from the code number, then you are not playing chinese whispers with your key cutting.
We all know what someone heard from someone from someone who heard from someone that heard from someone that knew someone that heard from someone. Key cutting is the same. You cut down the line a few times, and the edges round off a lot.
The locksmith is the man to see.
Joel wrote:vlad01 wrote:Tumbler itself is great condition just some of the wafers are damaged and same with some of the wafer springs.
Your lucky thats all thats happened.
What I've found is usually the case heavy keys bouncing on the tumbler flog out its bore in the barrel so it gets all sloppy and eventually wont turn the switch fully.
That and the tab/tongue part gets twisted from people being forceful with the key.
Interesting though, I;ve never come across damaged wafers.
A few worn ones but thats it.
I keep the door handles and igntion barrels from every car I wreck for the wafers.
The later ignition barrels have more wafers in them than the doors or earlier ones
The square holes in the wafer were mushroomed round on one side so it made them not fully follow the key code and made them difficult to pull out of their slots.
As for the ignition vs door barrel. the "M" profile barrels for type 3 have the same type and amount of wafers in both ignition and door. I have made a one key set for my 73 square back when I was 16 or so. Very easy to do and there was no such thing as internet 8 years ago in rural kyneton.
Vw = simplicity
😎
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
any locksmith worthy of the gig can key em alike
I've done this to several cars over the years
not really that difficult
fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
vlad01 wrote:I have made a one key set for my 73 square back when I was 16 or so. Very easy to do and there was no such thing as internet 8 years ago in rural kyneton.
Yea, same way I learned about them.
When I got my first Sbug back in '95 there was no key for the decklid lock, so inquiring minds pulled the latch apart with the idea of just removing all the wafers to disable it, couldn't believe how simple it was to just rearrange the wafers so the key worked instead.
Just remove all your locks and ignition and take them to a decent locksmith, he will key them all alike.
It's as easy as that.
Might be best to call round some locksmiths and ask first as there are locksmiths and there are locksmiths.
being a locksmith ...its not hard to rekey them you can buy wafer kits but are not that good a quality, i always try n use good cond og ones ,
Joel wrote:vlad01 wrote:I have made a one key set for my 73 square back when I was 16 or so. Very easy to do and there was no such thing as internet 8 years ago in rural kyneton.
Yea, same way I learned about them.
When I got my first Sbug back in '95 there was no key for the decklid lock, so inquiring minds pulled the latch apart with the idea of just removing all the wafers to disable it, couldn't believe how simple it was to just rearrange the wafers so the key worked instead.
Yeah, me too.......only a decade or so earlier
😂Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Alright, I'm really keen at giving it a shot myself, to the decklid anyway. I'm going to pick up some already keyed to like door handles, and then give it a shot to key the ignition barrel and decklid myself! 😀
I bought this >
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=150622010223&ssPageName=STRK:MEWNX:IT
and it arrived today. I stripped it of the wafers and ended up using all but one. but since the ignition barrel have one extra wafer I am still in need of 2.
One really
🤓 as I had a good used one from another door barrel but none of the last type I need.
So now I have the whole thing soaking in prep wash as the gunk is so bad the springs are jammed in there and some of the wafers just jam up.
Slowly getting there
🙄
Also order nos huf keys to code.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Vlad,
I'm thinking I'm going to give a couple of the local locksmiths some phone calls and see what they say about rekeying the decklid and passenger door handle.
That is all, as my drivers door and ignition already match, there isn't really much of a point of buying new handles and so forth.
🙂
i had the problem of only having the ignition key so i pulled all the barrels out of my van than fitting the keys lugs that didn't go down when the key was inserted an hour later I had a full set of locks using the one key and only that unlocked the barrels
👍👍😂🙅🥷😬🤓
