Beetle Door Hinges

matara Custom Title Time!

1,342 posts · joined Aug 2002 · 18 Sep 2003, 3:46 pm

#88278

I'm getting my beetle Karmann cabrio ready to go to the painters, and I have noticed that the door hinge is a bit rough. I know how to replace the pin, but I think that the hinge itself might need replacing as its been opened wide without the stay at some point and bent the metal on the door part of the hinge and cracked it.

I had a look at the hinge, and it is held to the door with 4 metal rivets or plug welds.

Does anyone know what the process if for changing these over? I'm guessing that you would have to locate some good second hand ones?

Also the cabrio hinge has 4 bolt holes and 4 screws whereas the sedan has only 3.

Thanks

Steve

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 18 Sep 2003, 5:38 pm

#88309

Drill them out and replace them with high tensile counter sunk allen key headed screws and nuts

I did this the other week on my smoothieee

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

555bug WRX Bug Boy

1,123 posts · joined Aug 2002 · 18 Sep 2003, 11:09 pm

#88488

the 62 model bug had 4 holes 🙂