to try somehting different i have sprayed the inside of the rear vents of my kombi matt black. as i am changing the car's colour anyway, i thought this would be a nice little custom touch, problem is tho, now that i have sprayed it, how can i protect it from overspray when i do the body orange?
Reimagined/Recycled/Upcycled Cool
Lots of work!! 🙁
You'll need to tape up each slot, or try and slide a peice of card shaped the same as the opening behind the vent slits. I did that for mine. I put blutak inside of the foldings of the slits to hold the card in place. Worked well. And any gaps I used tape for them.
Good luck!! Tim.
Charlotte Kevin and Brian
OK this just occured to me - but it's late and it may be a crap idea.
how about putting a large balloon in though the slot and blowing it up hopefully it will seal against all the slots and when you have finished you should be able to just pop it and the fish it out ???
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
I have got to say that is up there with the most ingenious ideas I have ever heard of.
No wonder you are diciple of Kol. 😀
how about you use the insert/bladder out of a coolabah wine cask........it is square in shape, and can be enjoyed prior to insertion in said area.......
I love it, I actually am laughing out loud. LOL
one wine cask bladder per side , two wine casks to drink, what sort of a paint job do you get after that?:jesus
Please, I need drivers side window regulator (winder mechanism) for my '54
What about just repainting the vents after you've done the orange??
"Tell him 'We've already got one'"
"one wine cask bladder per side , two wine casks to drink, what sort of a paint job do you get after that"
Who'd care :beer
Disciple of Kol - is a new addtion - glad you noticed
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
seriously:o the balloon is a great idea but I dont know if it would survive long enough against the onslaught of thinners?
Please, I need drivers side window regulator (winder mechanism) for my '54
Yes, I believe that the balloon would go "POP" as soon as the spray paint hit it... the paint thinners would disolve the balloon.... back to the wine cask or blu tac and cardboard....
was a good idea if the balloon was made of thick rubber....
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
How about useing some latex condoms as baloons........couple that with the wine casks and you will definatly get those holes filled in...........so to speak....LOL😀
The thought of a condom bursting would just scare me too much :P
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
😀 hahahaha, I'm laughing out loud myself 😀
Charlotte Kevin and Brian
Yep,
Your right about the burst condom.....not that scary in the short term, however in the long term......what a mess it would make of the paint; oh how the "paint"
would deform...then burst....leaving a mess and the ongoing repair bill and maintance for the "Paint"!
Easiest solution to the problem, use a "paint" that you can wash away...water soluable is good or one that can be watered down with other stronger better looking and durable paint that doesn't require general upkeep.
Just apply over the old "paint"!!!
Some people are like Slinkies . . . not really good for anything, but you still can't help but smile when you see one tumble down the stairs.
large black plastic rubbish bags, shouldnt leave anything behind (unlike those slipiery condoms)
How about card board cut to shape then a wine bag blown up behind to hold it in place
recycle, restore, enjoy
