Does anyone have any plans / measurements etc of cupboards for a camper ?
Also How does a top box actually fit to the roof - location of bolts etc
Cheers
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
Hey Steve🙂
No idea but just saying hello
Great to see you around here again. Have you been busy with work?
So getting ready to fit Wombat out😎
Hi Jen,
Yeah, had to do a bit of travelling for work but back now and got ADSL on so happy again.
Feels like I haven't seen ne1 for ages, so its good to be back
Slowly getting wombat going but its hard when your physically inept at everything 🙂
Good to hear from you
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
Good to hear from u 2🙂
Have missed your input here and humour :thumb
Can relate to the stuggle of getting things done on the VW. I majorly inept:jesus
Good to hear from u 2🙂
Have missed your input here and humour :thumb
Can relate to the stuggle of getting things done on the VW. I majorly inept:jesus
How are Bel and the Dr doing ?
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
Fine
Dean was over the other week and got another gennie into Bel which goes:thumb
I got the door panels off and Brad is going to upholster them for me so it all matches the seats
Have to have her front end looked at. Nothing major but probable king pins/suspension stuff. Dean adjusted them a bit for me to do now.
I'll try and get here back into full swing by summer
Dr L is going fine. He's been my daily driver while Bel was off the road, and a bit of a work horse. He's a real goer, I love him:kiss
fatboy wrote:Does anyone have any plans / measurements etc of cupboards for a camper ?
Also How does a top box actually fit to the roof - location of bolts etc
Cheers
So are you going to do this work yourself, or try to?
Good to hear - Brads a good bloke eh :thumb
Have you noticed my new title ?
I'm very proud of it - I'm thinking of starting a campaign for Kol for aussieveedubber of the year !
" Captain Picard, why are there no Indians on the Enterprise ? Don't you need IT Support ? "
Didn't notice LOL
It's very cool:thumb
He is a top guy. Never did hear what was happening with that vote, but he was certainly up there😎
p.s. I thought I'd quote to bring your question down so people can repond:o
Now we're chatting again LOL
Hope you get some answers
[Edited on 23-9-2003 by jenz58]
Steve a Camper site which has a good forum for future reference maybe
http://www.justkampers.co.uk/index.shtml
Go Westy has an interior workshop manual for sale. Maybe someone knows if it's good or not?
http://www.gowesty.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=gw&Product_Code=GVW-1210&Category_Code=bm-campmobileSteve this would be the shopw to go to in Florida, Bulli Brigade:thumb
http://www.ezcamper.100megsfree4.com/bullibergade.html
Got there from this site
😎
http://www.ezcamper.100megsfree4.com/otherezcampers.html
Well I'm not technical help, hope u enjoy pics
🙂Ah fitting out a camper from scratch - been there, done that!
Firstly does your Kombi already have cupboards and furniture in it, or is it an empty box? What layout are you going to use? Even factory Sopru campers had at least a dozen variations, and aftermarket converters had many more.
In my case, I used the basic layout of my Sopru's original design, but which was made from crappy laminated chipboard that was worn out. I measured everything, then ripped the lot out. When came the time to rebuild, I designed everything from scratch with help from my Dad, a retired high-school woodwork teacher.
We rebuilt the insides in several steps:
1. Clear out the entire rear, scrub clean and repaint so it looks like new.
2. Re-lay the floor in new 12mm plywood and apply new vinyl.
3. Work out how far the sink cabinet will extend out from the right wall, then design and make the rear seat mounting appropriately. Make sure the seat extends up and folds down.
4. Design the right rear clothes cupboard using cardboard templates. Make in 12mm marine ply and install.
5. Measure the sink, and work out how much space you have for the right front cupboard. Design and build, and set in place.
6. Fit the sink in between, then design and make the centre right cupboard to mount it.
7. Design and make the fridge cupboard for the left front.
8. Design and make the rear upper storage compartment.
9. Remove all, stain and estapol, then refit permanently.
10. Install plumbing, electrics, fittings, locks, handles, latches, hinges, doors and drawers.
Good luck!
if you have some interior in it you can do as i did. if the frame is sound, work out what bits of it are usable and what needs to be changed on the outside dimensions (for instance i lengthened my bench, moved the stove and sink around into spots i found better), then deside what needs storing, install shelves/drawers etc onto the frame and doors last.
Reimagined/Recycled/Upcycled Cool