grogy Custom Title Time!
1,000 posts · joined Aug 2007 ·
hi, does the scat shifter fit the same as the standard shifter using the guide plate that goes on bottom of the shifter n mounts to the tunnel. thanks greg
fitting scat shifter............. any takers.............
psimitar Son of Jim - Creator of Good
2,506 posts · joined Jan 2009 ·
Should have it's own internal reverse lock out plate. Have you seen if there is any further travel when the reverse lever is pulled?
My old Empi had an internal plate that lifted up for reverse to clear an internal lock out plate. Just needed a little tweaking before bolting tight down to make sure all gears were available 😉
My old Empi had an internal plate that lifted up for reverse to clear an internal lock out plate. Just needed a little tweaking before bolting tight down to make sure all gears were available 😉
madness is in the eye of the beholder 👍
1916baja Custom Title Time!
1,990 posts · joined Sep 2007 ·
pretty sure mine has its own lock out plate... i dont remember but i think i would as it would have been a pain in the ass to line it up if i had to use the stock one.
grogy Custom Title Time!
1,000 posts · joined Aug 2007 ·
thanks for the replies, greg