GordonOZ wrote:Evening all.
any views on the impact of 1 faulty plug lead on a T2 (2L) losing power. I have had a recurring (but ad-hoc) issue with the old girl just losing power, will run stationary but no juice to move and just stalls trying to move her, fires up fine but then won't pull away. Going through a few obvious things today i noticed one very dodgey conecton on No 1 plug lead so was wondering if that would be enough to take all the go out of it?
In the past I have had beatles running on 3, sounded ugly but could still limp along but wondering if the extra size of the bus means losing one cyclinder is enought o stop it in its tracks.
Will put new leads on it all round anyway but wondering if I have wider issues.
would welcome views or other sugestions to check.
cheers
Hi
usually one lead off and you can still drive your car..
but it sounds like Your accelerator pump isn't working on Your carburetor [if You only have one]
it squirts fuel into the engine every time You press the pedal down.. I had this problem when restoring My beetle.
it would idle all day.. and could get it to rev a bit but couldn't drive it out of My carport.. lol
the ball valve in the solex carby had old fuel in it which turned to gunk... as as I know its still stuck... changed carbies..
If You have twin carbies?? May be the distributor..
which will do it even if You have 4 carbies.. lol
cheers
LEE
PS: I had a problem with the little screw bit on the end of the spark plug unscrewing.. lol do You have wire plug leads?
they don't break internally... silicone etc can break when new - inside when pulling the lead off a plug or coil etc.. Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---