Kombi winder/ regulator mechanism

dubsurfer Commited Dubber

52 posts · joined Apr 2008 · 17 Nov 2012, 10:03 am

#931542

G'day all, My kombi drivers side window has stopped going up and down. I have purchased a second hand winder mechanism and have removed the broken one with the help of my trusty grinder. I now cant work out how the new one goes in. The gap between the inner door and the window guiding channel appears too small to push the new mechanism through, and when I do it starts to bend (not good). Do I need to remove the window. If so How I do this?. Any advice would be greatly appreciated as I am starting to get the shits 🙂

grumble Son of Jim - Creator of Good

2,672 posts · joined Jun 2008 · 17 Nov 2012, 1:04 pm

#931557

Drop the glass into the door,remove the 1/4 vent and it will be reasonably easy.If you get the sh ts do what the 30 second creaner man on tv does.....walk away!

binner Fahrvergnugen

981 posts · joined Jan 2010 · 17 Nov 2012, 7:38 pm

#931611

as above..... you need to take out the 10mm bolt also (i think) and then as you push the winder up in the gap pull the inner part (skin) of the door towards you to make the gap wider.
I get the shits all the time after I have vinda looh!!!!! 😂

71 SQ