Skip to content
Aussieveedubbers

Correct gearbox front mount? - oval beetle

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

pete wood 23 Windows of Awesome

6,828 posts · joined Jan 2004 ·

#939835
My oval has this front mount arrangement mated to a 1500 gearbox (info from PO).





As far as I can tell it's a fabbed up plate bolted from the early mount to the later nose cone. I'd like to return the front mount to stock as the current setup transmits a lot of vibration to the car and makes it kinda noisy. Could someone post some pics of the stock setup and/or tell me what I need to do to return the mounting system to stock pls?
"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#939883
Here's what the original mount looks like

Oval front gearbox mount

Trouble is if you have this later 1500 box instead of the original split case box then you may need either this mount

65-72 Beetle front gbox mount

Or quite possibly you'll need an early nosecone on the 1500 box to mate to the original Oval mount

Early gbox nosecone

I believe in your situation it's gonna be the expensive route and hence why the PO used the plate method to bodge it.

Another cheaper option would be to cut a 65> chassis mounting plate, for where the rubber mount bolts too, from a scrap vehicle.

oh, third option is trying to source a split case box and put it back to original but then you'll lose the cruising speed of the 1500 box.

Afraid there is no easy option on this one 🙁
madness is in the eye of the beholder 👍

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 ·

#939888
psimitar wrote:Another cheaper option would be to cut a 65> chassis mounting plate, for where the rubber mount bolts too, from a scrap vehicle.

🙁
You may be able to buy the weld in mount platform, but
Most who do this converson use a splitty bus nose cone, hockey stick and mount and it makes for a bolt in job.
westi wrote:That's mad Alan.

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#939942
Is it causing a problem ???
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

dangerous 23 Windows of Awesome

5,901 posts · joined Jan 2005 ·

#939947
I can see the broken nose cone in one picture.
westi wrote:That's mad Alan.

pete wood 23 Windows of Awesome

6,828 posts · joined Jan 2004 ·

#940009
Split bus hockey stick and nose cone eh? I think I might know who to talk to re that. Mezz, you'd need a front mount with that setup anyway right?
"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#940015
if your front mount is stuffed it normally makes the engine kick up when changing gears,
Whats your vw doing when driving ??
and nope no front mount.
I've done about 18,000 Ks in my 180HP Subaru bug no probs. the Subaru is a fair bit heaver tooo.
I also have another bug with no clutch cable tube, no prob for 30,000 Ks Just a bit tricky fitting cable 😊
Berg also makes those middle mounts .
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#940063
Yep if you want a bolt in solution then the Splittie nosecone or the rancho aftermarket one. Think there is another slightly cheaper manufacturer of this nosecone but you'll have to go looking thru the UK vendors to find it. I thought Heritage did it but maybe M7 or C&C.

That's of course if you can't find a second hand splittie somewhere here 🙂
madness is in the eye of the beholder 👍

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#940120
pop the back seat out and take that small cover off and look and see if the front housing is not hitting body.
and have a look at rear engine mounts to see if there not gone soft and gearbox rubber on metal mount there either.
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲