Aussieveedubbers

Fitting advise - New Koni reds

0 likes

895 posts · joined Jul 2008 · 18 Apr 2013, 1:21 pm

#951944

Hi guys
I've bought new koni reds. BJ/IRS Pretty keen not to stuff them up. I'll have another read of the instructions but, if your able to simplify that would be great. I'll probably leave them at full soft for now.

Also I have sway away adjusters in the front and it's low ish will I need to worry about bottoming out and damaging the shock. I have seen people use seatbelt looking stops...

Cheers

'68 BUG build(Racing)
http://forums.aussieveedubbers.com/viewtopic.php?tid=85509
69Baja
http://forums.aussieveedubbers.com/viewtopic.php?tid=88798
Manx(MaxFX)
http://forums.aussieveedubbers.com/viewtopic.php?tid=88799&page=1#pid826884

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 · 18 Apr 2013, 5:00 pm

#951962

Being low, I'd start at 1/2 way. The seat belt straps are for limiting droop which becomes irrelevant on a low car as the springs will loose tension often before the suspension stop.

Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE