Sunday got "told"....needed to settle with Beer. 🙂
I thought I was safe, not nearly as bad as last time (pre Warwick some years ago), 1am with stinger, then blocky......boy, the neighbours didn't like that.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Dave, yes it has plenty of pickup 🙂. So far I'm very happy with it. I've been playing catch up in the workshop and have a few jobs to do on Bluey before I venture out again. Hopefully I'll get some done over the weekend. Still some mods to do before dyno too.
Thanks Bugboymatt, that was a late night pic just before putting the engine in. Shame we didn't have time to put leads and belt on and tidy up things. It is what it is... 🙂
Same to Tarin and Craig, cheers guys and ..... it is what it is
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Moving forward....???? nothing to do with moving forward Mac. I use what I recommend and most clients I build engines for are looking for a breather system that is not quite so exxy as a Berg or CSP breather. The CB breather is adequate and consequently I'm using one. I modify or rework as necessary, but essentially I think they work fine.
Over the weekend I caught up on a few jobs that we ran out of time for prior to the Sydney trip
I made these thermostat style flaps for directing air better onto the heads. An instant change in reduced oil temps was noted (secretly glad the Sydney Showdown was postponed).
Valve adjust and oil change
Bit of a squeeze, cooler, thermo switch, oil thermostat.....
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
LIFE IN THE LOW LANEAll people have the right to stupidity but some abuse the pr
I need to go on that private road with my camera...... Craig, you'll have to come up to Noosa, have a holiday and take Bluey for a spin. It needs to be experienced 🙂😂😍🤓🤪👍👍😎
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
At last I got to fit the last of the JPM goodies. I've been waiting as I wanted to get a feel for the engine with the normal IDA setup before fitting the awesome JPM velocity stacks and venturi's.
So as usual ... it's, out with the old ..... and with the new
No rtestrictions there !! 🙂
The new look
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE