Skip to content
Aussieveedubbers

Engine bay seal

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 ·

#960224
Been searching here, Samba and Google to find out which way up for the rear seal with no joy. Is this way up correct for this type? Sorry for the mini pic, having IT issues😬

1 attachment · Log in to view

Camo Custom Title Time!

1,936 posts · joined Oct 2007 ·

#960235
For what type of vehicle. I was think Beetle looking at your avatar, but that seal is nothing like the one in my 61 Beetle sorry.

Kev
I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!

Click here for my (slowy) modded 1961 Beetle build.

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#960248
Yep, your holding it the right way for your late beetle Dave, although the section looks a little odd, appears a bit too long.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 ·

#960260
Yeah, its nothing like what came out but when I sit the rear tin in there it sits over/under the lip real nice. The length may come in handy to take up any clearance issues (caused by non-genuine unapproved panel modification😁) which my arse end definitely has.
Was a absolute bitch to fit and would hate to have to redo it, easier to pull the motor back out

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#960270
DubbyDo wrote:Been searching here, Samba and Google to find out which way up for the rear seal with no joy. Is this way up correct for this type? Sorry for the mini pic, having IT issues😬
Hi
I prefer the early model engine rubber..
its shaped like a K
and one lip sits on top and one lip sits under the tinware..
I have never liked the late seal.. it goes very hard and makes taking the engine out difficult...

look for early rubber engine seal... 111-813-705A

LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 ·

#960271
It had the K shape originally, I just ordered a rear seal and this is what turned up. I had some big gaps with the old seal so I'm hoping this one will fill them in

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#960273
http://s82.photobucket.com/user/68autobug/media/591b08c0-686d-4454-a024-0624b5f6b6fa.jpg.html?sort=3&o=0
as You can see from this pic
I am using rubber cut to shape... for the rear section..
as the rear apron is fibreglass and comes off...

early section on the sides..

I would buy the best quality rubber seal You can get..
CIP1 still sell the German ones.. as they go hard as a rock with the heat, because the rubber is so thick...

unlike the early seals -- would be better if they were longer too... the bits going either side of the tinware..

cheers

LEE

TESTING PHOTO BUCKET PIC [per PM]

dragged it here from My album... Lee
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---