tuning help

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 21 Oct 2013, 8:53 pm

#973355

have nearly racked up 200 miles on the refreshed 1641 and its freeing up nicely, my only drama is a very occasional pop out the exhaust if I accelerate lightly, it only does it the once then may not do it again for a while. I have tried adjusting the acc pumps slightly in and out with no change.
the other thing, when accelerating, 1st and 2nd its like a rocket without nailing it, 3rd is passable but if sitting on 2-2500 in 4th and trying to pick the speed up there is a lot of induction noise with very mediocre pickup, should I be upping my main jets? 120s at the mo

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts · joined Apr 2005 · 22 Oct 2013, 12:04 pm

#973389

I bet you're running a 009 dissy. Vacuum advance (SVDA) provides some sort of engine control response to the engine being underload, such as acceleration or your foot burried at 2000 rpm ish, besides the initial accelerator pump.

what carb you got?

what colours your spark plugs? you can tell mixture conditions by that.

(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 4:40 pm

#973406

magnaspark 2 dizzy, twin 40 IDFs, pop is very unregular (is that a word?) need to pull the plugs to check. Valve clearances checked and set, no vac leaks.

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 22 Oct 2013, 6:57 pm

#973426

Is it popping out the exhaust or the top of the carb?

Have you sync'd and balanced your carbs....... properly?

Are the Webers or other things?

What is you vent / jet set up?

Futue te ipsum!!!

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 8:03 pm

#973436

Spanish Webers (brand new) 28 vents 60 idles and 125 mains. balanced as best I could with no snail. To my ear (with hose) they sound very close

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 8:05 pm

#973437

what Weber tuning book/manual do people recommend? is there a gospel? tipping its not the Haynes one Ive seen

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 22 Oct 2013, 8:13 pm

#973439

I will say I have never seen a 60 idle in a 40 Weber.
Not saying it is wrong - just very surprised.
I would have thought a 50 was more appropriate
Rule of thumb is 1.25 x body size

Does it pick up in revs and peak at 2-3 turns out on the mixture

Again - your 125's seem large for 28 vents.
personally, I dont like 28's
I ran 32's very successfully on a 1600 with 135 mains
Rule of thumb is 4.2 x vent size

you have set the carbs but are the opening "exactly" at the same time.
I assume you have a redline hex bar set up?

They can be a bugger to set the heim (sp?) joint drop arms

Have you read these articles?
http://www.aircooled.net/vw-carburetors-jetting-102/

http://www.aircooled.net/synchronize-dual-vw-carburetors-103/

Futue te ipsum!!!

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 22 Oct 2013, 8:18 pm

#973440

DubbyDo wrote:what Weber tuning book/manual do people recommend? is there a gospel? tipping its not the Haynes one Ive seen

Personally I think the AC.net articles do the biz

What is the Haynes one you have seen?
Haynes does a good one that I have??

or this one

http://www.cbperformance.com/ProductDetails.asp?ProductCode=0103

I also like the Dellorto one
Similar but different idle jets size and emulsion tube numbers

http://www.cbperformance.com/ProductDetails.asp?ProductCode=0101

Futue te ipsum!!!

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 8:38 pm

#973443

Yeah read those, would like to educate myself so I have more of an understanding of what effect any changes I make will have.
Have a CSP bell crank setup, Redline Hex Bar that was supplied with the carbs was missing the arms that the heim joint rods connected to, so glad I didn't go that way!!
could try dropping the original jets back in to see what the difference is (55s and 120s)

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 22 Oct 2013, 8:49 pm

#973447

CSP = good

Are you getting reaction from the mixture screws?
How many turns out are they?

Futue te ipsum!!!

silver Dangerous when poked

2,169 posts · joined Dec 2002 · 22 Oct 2013, 8:58 pm

#973448

Exhaust leak?

Keeping it real !

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 9:02 pm

#973450

started at 1 1/2 turns out, ran better when wound in, was exactly the same with the smaller idles

DubbyDo Officially Full-On Dubber

276 posts · joined Jan 2012 · 22 Oct 2013, 9:05 pm

#973451

silver wrote:Exhaust leak?

checked that too, all flange joints (vintage speed), nice and tight with new gaskets, cant hear or feel any gas escaping out of the joints