Skip to content
Aussieveedubbers

WTB - Judson Supercharger 36 - 40hp

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

oxford48 Learner Dubber

13 posts · joined Oct 2012 ·

#975160
WTB - Judson Supercharger 36- 40 hp any condition.
Located in Melbourne
Interstate is absolutely fine.
info@mioche.com.au

gusfallis Learner Dubber

4 posts · joined Oct 2013 ·

#975242
Hi there, i've got a 40hp one that has been reco'd and has all new bearings and seals.
Has been NDT inspected with no cracks found.
Faces machined within tolerances.
Original carby and judson aircleaner.
New oiler.
Only thing I don't have is lower pulley but I was going to use serpentine belt to run.
Only needs to be assymbled. I haven't rebuilt because I didn't want to put it together and just sit there.
I'll rebuild when I want to use ensuring everything is fresh.
Might be interested to part with for right money.
PM me with what you are looking at paying for one.
Cheers, Gus

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#975301
a bit of advice the 36 and 40hp housings are different in mounting studs locating and that makes them sit different on the manifold

so they vary, plus the 36s have twin drive pulleys and the 40s have single with and idler wheel

I have one of each fitted to both 36 and 40hp engines
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

lohoon Wolfsburg Wizard

466 posts · joined Sep 2002 ·

#975311
I didn't think the idler was a original part but a re engineered piece that could be fitted to either 36 or 40 hp engines?

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#975316
I didn't think the idler was a original part
I haven't seen an Idler on a 36hp kit

However I do have a picture with idler on the Judson Instruction sheet I have for 40hp set up so it was an original part of the 40hp kit
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

oxford48 Learner Dubber

13 posts · joined Oct 2012 ·

#975488
Also interested in any parts associated with the Judson supercharger.
Pulleys, linkages, etc.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#975541
I did get onto one a while ago but the guy couldn't make up his mind if he wanted to sell on not BUGGAR
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

sgetty Fahrvergnugen

994 posts · joined Sep 2003 ·

#975636
🙂

oxford48 Learner Dubber

13 posts · joined Oct 2012 ·

#975662
Looks like a good buy...

oxford48 Learner Dubber

13 posts · joined Oct 2012 ·

#975908
Any Judson's, still looking if you are thinking of parting with one.

gusfallis Learner Dubber

4 posts · joined Oct 2013 ·

#976489
Hi Eddy, tried to call but no answer.
Can't pm either as haven't posted enough to be allowed yet.
Working on that.
Pm me your email and I'll send photo's if you like.
Would take approx $1800.
All new bearings, seals and vanes.
Carby, linkages, original judson air cleaner and brand new oiler.
Only thing needed is lower pulley.
If it doesn't sell then I'll keep it for the Oval.
Cheers, Gus

oxford48 Learner Dubber

13 posts · joined Oct 2012 ·

#976958
Hi Gus,
PM sent.