Skip to content
Aussieveedubbers

wtd: brisbane,rebuildable 1600 engine

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

mangrovejack38 Seriously Crusin Dubber

159 posts · joined Oct 2006 ·

#975654
hey all,chasing a rebuildable 1500/1600 engine or parts there of,crank, rods,pushrods heads etc.anyone got any bits they want to part with?
will travel around bris to pick up.
pm or message 0414645635or just post on here,cheers,Jack.

jamiesc Wolfsburg Wizard

559 posts · joined Dec 2010 ·

#975693
ive got a 1776 new pistons bigger head and crank the whole lot if your interested in spending more pm me for more infor
cheers jamiesc

spectral Casual Dubber

39 posts · joined Feb 2013 ·

#975721
I have this one which is complete inc carby, fuel pump, coil, and exhaust/extractors, clutch etc. I'll take $175 for it. I'm near Chermisde. (on the edge of Wavell Heights)

Its a 1969 1500cc single port I believe. The last shot has the engine number so you can do your research 🙂

There is a couple of drips of oil on my concrete from where it has been sitting for over a year. The carby is covered over so there isn't any nasties in there and it still turns over no probs.

http://www.clubmans.com/beetle/forsale/105-1.JPG
http://www.clubmans.com/beetle/forsale/105-2.JPG
http://www.clubmans.com/beetle/forsale/105-3.JPG
http://www.clubmans.com/beetle/forsale/105-4.JPG

mangrovejack38 Seriously Crusin Dubber

159 posts · joined Oct 2006 ·

#976004
pm me a price jamie,and details of what you have,I have crank,rockers and cam and case ,basically looking for all the extra bits to build up a mild engine
spectral I also sent you a pm,cheers,Jack.

spectral Casual Dubber

39 posts · joined Feb 2013 ·

#976007
thanks jack, replied. I saw you sent it a while ago... seems i'm not getting PM notifications via email. Sorry for delay.

mangrovejack38 Seriously Crusin Dubber

159 posts · joined Oct 2006 ·

#976016
pm's mustnt be working spec

bushed Wolfsburg Elder

3,541 posts · joined Dec 2006 ·

#976074
IF U NEED HTR BXES oops
clutch carb etc I have, seems a 1500 case compl
1 recoed head n more
and tinware Jack
b
want any vw bits old but like me, Made in Germany!!!

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts · joined Apr 2005 ·

#976081
Mate i got a pulled apart 1600 long block complete. I'll even throw in a box of new pistons for $150 (no barrels or rings).

http://s126.photobucket.com/user/bajachris88/media/IMG_0247.jpg.html?sort=3&o=115

Your choice of dual port of single port heads. The motor came with single port heads.

I bought it for $550 on the Action day before last (engine) and pistons for $40 (NOS brazilian). It was a working 1600 but had not been moth-balled properly and so I stripped it down for a rebuild. This is as far as i got before i bought an ally case and gone for a turbo, bored, stroked project for my baja. Its just sitting in my shed consuming space. At least its in a state where you can really inspect the components and see if it suits you.

Thanks,
Chris.

0402 568 003
Location: cornubia, SEQ (5 mins from Loganholme Hyperdome)
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!