Hopefully I don't take the Drag Tech Section virginity with a silly question.
We know that weight is one of the enemies of a drag car and is basic free HP once removed correctly.
My question is:
What is a safe weight to take out and from which locations without affecting the structure and integrity of a vehicle.
Strip.....
Street.....
As I'm planning to put a 66' street car on a strict diet the thought was to remove material not only from the roof gutters but also the floor tunnel, currently weighing the Steel guards, decklid vs Fibreglass to see how much weight can be saved if any.
ben
bitten by the bug..........several times
Craig Torrens6 times Australian, 7 times State Hillclimb Class Champion
Yep, I'll second the doors! And the perspex too, there's about 60kg just in those two I rekn.
Hey Fish, next time you're on "The Lounge" check out the weight-saving thread from start to finish if you haven't already done so, some of those blokes really need a life! 😂
And after that? These only weigh in at 13kg including tyres, which is 3kg per corner.........
........and I know sticky roundy-roundy tyres in 195/60R14 (probably 0.5kg lighter) can rattle out 1.7 60ft all day easy-peasy. Also lowers your effective gearing by a good 10% compared to a 165/80R15, more torque multiplication on the line for a street/strip car.