So before I go to buying a new centre pull linkage for an experiment and see, would anyone out there have a one for a type one upright motor, would also try a hex but mods would be more extensive. In Bris but postage wouldn't be a killer if the linkage is not too dear.
If anyone had a spare lying around you wanted to get some money for.
Thanks, Cam - 0405 373 772
I used a type 3 linkage with a few mods on my 55 with a single port 1500 a lot of years ago,we ran holden strombergs with insulation blocks to get the height for the links to work. I have a couple of flat motors but it will be a while before I can organise any parts.PM if you can't get any bits before this.
They are cheap enough to buy a new set instead of using something that is worn out.
also hve t3 one or two centre bits cam
want any vw bits old but like me, Made in Germany!!!
hi
i think i have what you need
i live Southside Bayside of Briss but work in and around Brissy
$35 and its yours
Cheers
David
0434 582 264
