Skip to content
Aussieveedubbers

Alternative rearview mirror for a 1970

0 likes
Share Share on Facebook Share on X Share on Reddit

mgiles Casual Dubber

34 posts · joined Jan 2014 ·

#987646
Hi Guys and Gals,

Anyone know of a suitable alternative mirror to the wrapped textured plastic rearview mirror for the 68+ beetle?

The backing of the mirror is dying on mine and getting very spotty so it needs replacing. Real hard to see with in low light or when its raining.

I like the look of the chrome ones which you can get for the earlier beetles but they look like they have a different mounting method on the roof.

Anyone seen chrome (or stainless) versions of the 68+ mirrors?

I like the style of E but I currently have (and guess need) G.
http://www.bughaus.com/beetle_interior_mirrors.htm

Cheers,
Mark

zayus Wolfsburg Wizard

437 posts · joined Sep 2002 ·

#987719
Hey, hey Mark,

My understanding is: by 1968, US Design/Safety Regulations, stipulated that the interior rearview mirror needed to be collapsable - to reduce the risk of injury to passengers. Volkswagen then introduced the plastic mirror to all markets in 1968.

You should be be to find an after market chrome or stainless mirror from any Hot Rod website.

Bryce

mgiles Casual Dubber

34 posts · joined Jan 2014 ·

#987723
Thanks Bryce. Thought that might be the case.
I'll check out some of the hot rod sites.
Cheers.

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts · joined Apr 2005 ·

#987741
Be careful!

i ordered an aftermarket mirror from the states, but because the 'neck' of the mirror that mounts to the body is off centre, the US one had the neck off centre in the other direction. (IE: there is left hand or right hand drive variant of the mirror).

The mirror i got from the US couldn't be used, as the neck offset repositioned my mirror to knock into the sun visors... so its no good.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

mgiles Casual Dubber

34 posts · joined Jan 2014 ·

#987883
Ahhh cool. Thanks for the heads up.