Switch removal?

tan36 Casual Dubber

31 posts · joined Dec 2006 · 10 May 2014, 6:33 pm

#990485

Hi everyone, finished removing most of the wiring under the bonnet today, but can not work out how to remove the switches inside the car. Eg hazard lights, wipers etc. they are the pull out push in ones 1970 beetle. Thanks 🙂

barls Administrator Causer of Chaos and Mayhem

9,473 posts · joined Jun 2004 · 10 May 2014, 7:18 pm

#990487

depending on the switch the knob screws off then there is a nut that requires it to be unscrewed using ether the proper tool or a pair of needle nose pliers and then they just pop out.
the different ones are the fresh air box ones they just pull off.

“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me

tan36 Casual Dubber

31 posts · joined Dec 2006 · 10 May 2014, 7:21 pm

#990488

Thanks, mine where stuck up really really tight so where not screwing the top part off so that had me at a loss, but got that bit off will have a go at other part with the needle nose tomorrow.