Is there anyway to stop play between the input and output shaft on a squareback sterring box. And are they grease filled or oil?
Cheers all
Clyve
clyve Officially Full-On Dubber
310 posts · joined Feb 2011 ·
play in steering box
psimitar Son of Jim - Creator of Good
2,506 posts · joined Jan 2009 ·
Gotta be similar to T1 and T2 boxes so should have both worm and roller adjustment.
As I'm not familiar with T3 steering then I'd need a pciture to help any further.
As I'm not familiar with T3 steering then I'd need a pciture to help any further.
madness is in the eye of the beholder 👍
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
They are similar to the T1 box so if the bushes or worm aren't worn out giving axial play it should just be a matter of adjusting.
psimitar Son of Jim - Creator of Good
2,506 posts · joined Jan 2009 ·
Worm bearing wear play can be reduced with the large locknut and grub screw. This one should always be checked before the roller is adjusted. 🙂grumble wrote:They are similar to the T1 box so if the bushes or worm aren't worn out giving axial play it should just be a matter of adjusting.
madness is in the eye of the beholder 👍