syncro front 290mm disc rotors

PAZZAN Wolfsburg Wizard

592 posts · joined Jan 2008 · 26 Jan 2015, 1:05 pm

#1007370

does anyone know what model mercedes the big brake kit for syncos is off I need new disc rotors and I am finding very hard to match the disc I have on the van, its about 290 mm dia hat is about 48mm ..I think the brake kit was a Oettinger kit..

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 · 26 Jan 2015, 8:21 pm

#1007415

Hi

Try doing a search on the DBA website http://www.dba.com.au/

MickH Hairy Gutted Sloth

3,389 posts · joined Sep 2003 · 26 Jan 2015, 9:34 pm

#1007423

Didn't they use Audi A6 discs???

tssnq.com.au

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 · 26 Jan 2015, 10:50 pm

#1007430

Use the Brembo online catalogue as you can search using disc dimensions instead of just looking for a manufacturer and model. Much more useful in cases such as yours.

madness is in the eye of the beholder 👍

PAZZAN Wolfsburg Wizard

592 posts · joined Jan 2008 · 27 Jan 2015, 5:56 am

#1007434

merc & audi are close but not the same,tried both catalogue dba & brembo no luck taking them down to dba office tomorrow at silverwater see what they can do 😵‍💫

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 · 29 Jan 2015, 12:01 am

#1007490

So using dimensions in the Brembo was a no go? Did you try just using the diameter and width only so as to maximise findings?

madness is in the eye of the beholder 👍

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 · 29 Jan 2015, 12:02 am

#1007491

So using dimensions in the Brembo was a no go? Did you try just using the diameter and width only so as to maximise findings?

madness is in the eye of the beholder 👍

PAZZAN Wolfsburg Wizard

592 posts · joined Jan 2008 · 29 Jan 2015, 4:26 pm

#1007506

YEP DBA said mitsubishi evo 294mm😵‍💫 x 24mm are the closest to the specs so might try them just drill 112 pcd for vw 😵