Need to clear some stuff out so here goes 🙂
2 X Flywheels - $5 each
4 X Tappet covers - FREE
3 X Single Port Carby Manifolds (type 1, 3 & 3.) - $5 each
4 X Assorted Single port heads - $15 pair
6 X standard rocker assemblies - FREE
4 X Standard fuel pumps (unknown conditions) - FREE
1 X Beetle fan shroud $10
2 X Beetle Bonnet hinges and springs (1964) $15
2 X Single Port Cylinder Tinware $10
4 X Assorted Oil coolers - FREE
Can get pics if you need them...
Or more info 🙂
Sms or call me on 0447 055 03 five
r tap cvrs 1600 pls 2 to me...
any 36 hp items or what hpor cc are they pls??
want any vw bits old but like me, Made in Germany!!!
OK, will have a look....
Also think i have some 1100 heads and tappet covers (smaller i think?)
Cheers
Here goes for pictures!!
OFFERS??
.
..
...
....
Bump... I do need this stuff moved.. probably 75% of this is free if someone wants to come over and take the lot? 👍
Do you still have any of the cranks (mainly after the gears etc., but I'll take a whole crank) and tappet covers?
Yep.. got 3 cranks left... come take your pick...
Half a dozen tappet covers left...
Come and take it away 👍
Still want those bits pudgy?
Engine case, 4 tappet covers, alternator stand, cam, crank & conrods, and 2 heads sold today...
Hurry!!
Yeah sorry I had sent you a PM...not sure if it went through. When is the best day and time to pickup?
Nup.. didn't get it 🙁. Will send u a PM.
Have you got any 36hp motor bits.
Have got some push rod tubes (they are quite small compared to the others i have..)
I have a really small head..
And a barrel or two maybe!
Sent u an email...
Nearly 50% gone!
Come and take peoples!
Hi Mate,
Chasing a 12v flywheel to suit my 1300.
Not sure what else to tell to see if it suits.?
Need one with a good ring gear and machinable clutch face.
Thanks,
Anthony.
Yep.. standard 180mm Flywheel is there.. $10. 6 or 12 volt?
Cheers
Bump, SMS sent Anthony...
Most is gone..
If you see something you want - ask!!
Need this all gone please!!
Do you still have the 12volt fly wheel?
Hey,
Yes, I have 2 flywheels left, not sure if they're 12 v or not though..
Do you know how to tell?
Thanks
Pretty sure the 12 volt flywheel has 130 teeth. The 6 volt fywheel has less - maybe 109.
Cheers
Just checked against a spare 12v 8 dowel flywheel i had, and its a 6v sorry.
Ok. thanks for checking. Do you have a dual port inlet manifold centre section with the preheaters by any chance?
Cheers
No sorry.. only have the inlet manifold ends...
