seat belts

clyve Officially Full-On Dubber

310 posts · joined Feb 2011 · 28 Dec 2015, 4:15 pm

#1022311

Ok dubbers can anybody show me a picture of where the lower seat belt bolt go on a 67 bug please, I have the top holes and the holes for the ones on the tunnel in the middle dut no lower ones????
Thanks all sloth

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 28 Dec 2015, 4:55 pm

#1022312

there was no mount hole for the lower end

most use 2 plates top and inside sandwiched through the floor pan

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

clyve Officially Full-On Dubber

310 posts · joined Feb 2011 · 28 Dec 2015, 5:02 pm

#1022313

Not quiet sure what you mean can you enlighten an old idiot pls cheers

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 28 Dec 2015, 7:03 pm

#1022318

there is NO lower hole for mounting a 3 point safety belt

most people get 2 pieces of steel plate then drill a hole in the floor using one plate on under side and one on the top to secure the belt at the 3rd point

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Governor Wolfsburg Wizard

414 posts · joined Nov 2008 · 29 Dec 2015, 6:15 am

#1022339

What he means is they only came with a sash belt and not a lap and sash.
The belt only went from your shoulder to the gesrbox tunnel and not back again over your lap
Most people buy the lap and sash belts and drill another hole in the floorpan by the side of the seat near to the door and use a plate to spread the load ondernesth the floor when they bolt the belt to it.... If that makes sense?

clyve Officially Full-On Dubber

310 posts · joined Feb 2011 · 29 Dec 2015, 9:03 pm

#1022356

Thanks guys

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 30 Dec 2015, 8:05 am

#1022362

You can purchase a set of plates one with a captive nut on it

makes the job easier

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409