Does anyone know where you can get the longer frame horn/transmission mount bolts from? I have seen them somewhere but cannot remember where.. I need to mount the Subarugear mount on top of the Manxter's cage rear brace thingy.. Thanks!
It will all be OK in the end, if it's not OK it's not the end!
I've never heard of longer ones for there. The bolts are long enough so the bolt on 3 point kafer bars don't present a problem but s'pose more than this would.
I'd take one to a bolt supplier and see if they can help. I wouldn't be surprised if it was classed as an ultra fine thread due to the bolts diameter.
madness is in the eye of the beholder 👍
They are 18x1.5
Cheers guys, yeah I found the thread size and length on the samba, also found some high tensile bolts that are longer but have no step, so I will machine some collars up and tig them on if I can't buy any with shoulders.
It will all be OK in the end, if it's not OK it's not the end!
Welding not a good idea...make the collars a shrink-fit on the bolts, or Loctite them on.
I'd rather wear a Beetle out by racing it than by polishing it!
