Skip to content
Aussieveedubbers

silicone gaskets

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

pv370 Officially Full-On Dubber

272 posts · joined Apr 2014 ·

#1034654
OK so the oil change gaskets have started to leak a bit ????
anyone had any dealings with the silicone ones ????
where can i get them ????
are they better than the cardboard ones ?????
how much ??????

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1034658
flatten the sump plate panel beat it around the stud holes
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

pv370 Officially Full-On Dubber

272 posts · joined Apr 2014 ·

#1034660
yeah tried that.... was fine for a couple of months and now a very small drip

thought silicone gaskets would be a set and forget option
can boris get them ?????

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#1034661
no check the plate again and make sure the area around the holes is flat

go to super cheap and get a tube of sticoflex great for all oil leaks but clean and pre sol surfaces before applying

are you using the copper washer and acorn nuts
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

pv370 Officially Full-On Dubber

272 posts · joined Apr 2014 ·

#1034662
yeah using acorn nuts and new copper washers........
sound like a project for next weekend....thanks