Flywheel changeover

Adam_C Custom Title Time!

1,180 posts · joined May 2003 · 2 Oct 2003, 1:40 pm

#93990

Can someone out line what exactly is dont to change a flywheel from one moto to another . . . . and how to use a peice of angle iron as a flywheel lock,

thanks
adz

Adam
Adzslick@iprimus.com.au

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 2 Oct 2003, 4:18 pm

#94071

Drill two holes that align in the clutch bolt hole so u bolt the angle iron to the flywheel and it locks against the ground

Ive been doing it this way since 1969 or so,

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Adam_C Custom Title Time!

1,180 posts · joined May 2003 · 2 Oct 2003, 10:28 pm

#94377

ahhh . . . . . i has it on the clutch plate bolt and the bellhousing stud . . . nowonder it was really weak and didnt like the pressure......thanks dave 🙂 ur a champ

cheers
adz

Adam
Adzslick@iprimus.com.au

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 3 Oct 2003, 8:11 am

#94481

Adz

Ive had the piece of angle 50 x 50 x 1 meter long for years n years... I have different holes drilled in it for various removal procedures on most type of VW engines.

I would be lost with out it, go get yourself a length and you will find it most usefull over the years while yr playing with cars ...

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Adam_C Custom Title Time!

1,180 posts · joined May 2003 · 3 Oct 2003, 9:37 am

#94539

yeh dave got a bit here . . . .just didnt wana do it wrong and snap the stud

cheers
ill let ya know how i went
ads

Adam
Adzslick@iprimus.com.au