urgent help!!!

Jonno777 Slammed & Awesome Dubber

89 posts · joined Sep 2002 · 14 Oct 2003, 4:24 pm

#99052

I've done valve clearances quite a few times, and today I did the same proceedure as usual (from memory).

set the cog at TDC (for cylinder one)
set the gaps at .006
turned cog anticlockwise 180*.
Did the same proceedure for 2nd cylinder, 3rd, then 4th.

Did the timing...

Then started her up. She sounded OK but only noticed the problem once I started driving. She needs high revs to get going, and then once she's going, she can only go about 20kph (revving high in 2nd).

If I change to 3rd, she chugs and loses all power...

What did I do wrong??? 🙁

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 14 Oct 2003, 4:37 pm

#99058

Sounds about right

have a read of Robs notes

http://www.geocities.com/aussiebug1970/valveadj.html

Are you SURE you timed it right????

Maybe not do up a valve right???

I would have a cup of tea and just start again

Futue te ipsum!!!

Jonno777 Slammed & Awesome Dubber

89 posts · joined Sep 2002 · 14 Oct 2003, 4:55 pm

#99064

Thanks Blue.. I had another read through that and I think I did alright, but I didn't feel for the little notch in the distributor rim.... I've never done that.

Maybe I messed up the distributor somehow.

If I accidentally put a lead in the wrong place, could it cause such a problem?

When the piston in cylinder 1 is at it's fullest extent, the rotor arm points to cylinder 3 (or 4?). Shouldn't it point to cylinder 1? (rotor arm tip pointed at cylinder 1 point) ??

Baja Wes V6 Baja Pioneer

3,119 posts · joined Aug 2002 · 14 Oct 2003, 5:08 pm

#99070

cylinder 1 will be at TDC when the rotor is pointed to spark plug lead number 1 or number 3.

When it is pointing to number 1, then cylinder 1 is firing at TDC.

When it is pointing to number 3, then cylinder 1 is at the end of the exhaust stroke TDC.

The line / indent in the top of the dizzy tells you when the rotor is firing on cyl 1.

Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... 🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.

Jonno777 Slammed & Awesome Dubber

89 posts · joined Sep 2002 · 14 Oct 2003, 6:50 pm

#99117

Had a hamburger, stood behind the car and looked at the engine.... did a little math, and figured I had the firing count wrong.

MAN AM I SO HAPPY!! Thanks for your help, fellas. :bounce

Bizarre Moderator The artist formerly known as blue74l

12,785 posts · joined Aug 2002 · 14 Oct 2003, 7:20 pm

#99139

:thumb

Thats it dude!
Have faith!!!

Futue te ipsum!!!

robnjo Veteran Volks Folk

2,082 posts · joined Sep 2003 · 14 Oct 2003, 7:21 pm

#99140

yep glad to be of help... he he he😀