Black_math Blaupunkt
1,111 posts · joined Sep 2003 ·
The 2nd in my seris of questions about rotarys in volkswagens, has anybody every seen a rotary in a beetle or heard anything about how well they would perform? 🙂 just curious/ thinking bout it:P
Rotary in a beetle
RSI Commited Dubber
53 posts · joined Jul 2003 ·
check out davids 66 baja showcar , he's also got some photo's
Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion
8,040 posts · joined Jan 2003 ·
My brother inlaw owns RX engineering in Newcastle, he had a stock 13b turbo in a Superbug, Steering was very light when boost came on 😀 😀
Stanley I guess the reward is in the doing of it
4,523 posts · joined Mar 2003 ·
NOT AGAIN
Doug Sweetman Nil Bastardo Carborundum
2,128 posts · joined Sep 2002 ·
yes again, get used to it - its a logical conversion (once again, if you want a conversion that is. If its air cooled for you, then thats your right !)
There is a gentleman in Perth with a 13B turbo in a late 60's beetle (pearl white, a fairly old conversion, maybe someone on this forum knows the guy) that apparently does low 13's (which would make it the quickest street legal bug in WA)
They are a small light engine, with a great ability to make power. The turbos (12A and 13B) I think would be too hard to get registered. Dont believe people who tell you they require heaps of maintenance or are unreliable - thats just hangovers from the early rotaries in the 70's - technology has come a ways since then.
They are thirsty though.
There is a bloke on this forum who has had a number of Rotary Mazda's - he should be able to give you some better info.
There is a gentleman in Perth with a 13B turbo in a late 60's beetle (pearl white, a fairly old conversion, maybe someone on this forum knows the guy) that apparently does low 13's (which would make it the quickest street legal bug in WA)
They are a small light engine, with a great ability to make power. The turbos (12A and 13B) I think would be too hard to get registered. Dont believe people who tell you they require heaps of maintenance or are unreliable - thats just hangovers from the early rotaries in the 70's - technology has come a ways since then.
They are thirsty though.
There is a bloke on this forum who has had a number of Rotary Mazda's - he should be able to give you some better info.
wacked1 Custom Title Time!
1,508 posts · joined Jul 2003 ·
Hey dude at the Boris picnic day at Sydney there was a sweet bug with a rotary motor in it the guy was selling it for about $10,000 it was engineered and apparently went really good. It was green in colour and had fushes on it.
:jesus
:jesus
Baja Wes V6 Baja Pioneer
3,119 posts · joined Aug 2002 ·
go to the links/archive post at the top of this subforum. Then go to rotary, and click on the link to Zenjoe's site. He was what you are looking at doing.
Basically if your in QLD which I think you are, you will not get a turbo rotary legally approved in a beetle. Therefore you are stuck with 12A or 13B naturally aspirated.
You would need a heavy superbug or something more than 870kg to get the 13B approved.
You would still need a heavy later standard beetle of about 800+kg to get the 12A approved.
There was a 13B turbo manx buggy at the FF&R Jamboree this year, it ran 12's but was illegally modified for sure.
Basically if your in QLD which I think you are, you will not get a turbo rotary legally approved in a beetle. Therefore you are stuck with 12A or 13B naturally aspirated.
You would need a heavy superbug or something more than 870kg to get the 13B approved.
You would still need a heavy later standard beetle of about 800+kg to get the 12A approved.
There was a 13B turbo manx buggy at the FF&R Jamboree this year, it ran 12's but was illegally modified for sure.
Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... 🙂
www.taylorcycles.com.au - My DH MTB racing brothers shop.
www.taylorcycles.com.au - My DH MTB racing brothers shop.
veedubman Learner Dubber
2 posts · joined Jan 2009 ·
hey guys
i was just wondering
how much do you reckon the whole conversion would cost
ive been searching for days
and cant seem to find anything
either im a complete dropkick
or there arent any sites that have pricesall help will be greatly appreciated
👍
i was just wondering
how much do you reckon the whole conversion would cost
ive been searching for days
and cant seem to find anything
either im a complete dropkick
or there arent any sites that have pricesall help will be greatly appreciated
👍
Mick058 Custom Title Time!
1,580 posts · joined Jan 2008 ·
'Bugzla' had his rotary 68 bug up for sale - good price too! Check that out.
IT doesn't cost much to do the conversion - just time and trial and error. I had heating issues, they run hot - need to get the right radiator and oil cooler in the right spots in the right size with the right thermostat
IT doesn't cost much to do the conversion - just time and trial and error. I had heating issues, they run hot - need to get the right radiator and oil cooler in the right spots in the right size with the right thermostat
Euro_67 Wolfsburg Wizard
690 posts · joined Oct 2003 ·
This might help explain what is required for the conversion.
http://www.geocities.com/zenjoe/vw.html
It is a US site, so check local regulations for legalities.
http://www.geocities.com/zenjoe/vw.html
It is a US site, so check local regulations for legalities.
Mick058 Custom Title Time!
1,580 posts · joined Jan 2008 ·
Price wise i reacken 2-3k
ttriebler Officially Full-On Dubber
321 posts · joined Jan 2008 ·
I've had quite a number of Rotaries in my time (in Mazda Bodies) and I say it all depends on what you want to do with it and how much power you would like to make.
Given today's technology, a fuel injected modern rotary engine is an excellent motor, very smooth power delivery and all the revs you could want. The fuel injection takes care of easy starting, not running out of fuel at the top end, and smooth power. There is basically zero maintenance on them except to change the oil regularly and make sure you run an oil cooler. The new generation of Apex seals fitted to rotary engines have a lot of longevity.
The best transplant IMHO would be an EFI 13b Turbo, followed by a 12a EFI Turbo (would need aftermarket EFI computer) as these make nice torque, as much power as you could want and run very quiet as the turbos take a lot of energy out of the exhaust.
However, given the power/weight restrictions of the ADR/RTA Nazis, it's unlikely that you could do this conversion legally.
So the next best thing is to do a 13b Extend port EFI motor. This will still idle well, give good fuel economy and make around 150kw which should be plenty in a beetle. Using 2 decent mufflers will keep the noise to an acceptable level. I would stay away from bridge ports and peripheral ports as they are more like having a BIG cam and an OBSCENE cam in a normal engine - poor idle, loss of low down torque, and then a massive hit at the top end of the rev range.
If you wanted a bit more and could get it through the authorities, have a look into fitting a triple rotor 20B with an extend port and EFI. Thos things have plenty of mumbo and of course lots of useable torque low in the rev range.
All of this takes time and money to do properly though, so make sure you set aside funds for uprated gearbox, efi pumps and filters, lift pump, EFI hoses and return hoses, and a good exhaust system.
Given today's technology, a fuel injected modern rotary engine is an excellent motor, very smooth power delivery and all the revs you could want. The fuel injection takes care of easy starting, not running out of fuel at the top end, and smooth power. There is basically zero maintenance on them except to change the oil regularly and make sure you run an oil cooler. The new generation of Apex seals fitted to rotary engines have a lot of longevity.
The best transplant IMHO would be an EFI 13b Turbo, followed by a 12a EFI Turbo (would need aftermarket EFI computer) as these make nice torque, as much power as you could want and run very quiet as the turbos take a lot of energy out of the exhaust.
However, given the power/weight restrictions of the ADR/RTA Nazis, it's unlikely that you could do this conversion legally.
So the next best thing is to do a 13b Extend port EFI motor. This will still idle well, give good fuel economy and make around 150kw which should be plenty in a beetle. Using 2 decent mufflers will keep the noise to an acceptable level. I would stay away from bridge ports and peripheral ports as they are more like having a BIG cam and an OBSCENE cam in a normal engine - poor idle, loss of low down torque, and then a massive hit at the top end of the rev range.
If you wanted a bit more and could get it through the authorities, have a look into fitting a triple rotor 20B with an extend port and EFI. Thos things have plenty of mumbo and of course lots of useable torque low in the rev range.
All of this takes time and money to do properly though, so make sure you set aside funds for uprated gearbox, efi pumps and filters, lift pump, EFI hoses and return hoses, and a good exhaust system.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com
pete wood 23 Windows of Awesome
6,828 posts · joined Jan 2004 ·
and keep counting. anything brought in from OS is routinely rebuilt by the decent rotary workshops these days. and a decent rebuild is not cheap from what I hear. then you need to put a good gearbox behind it... 🥲 I'd suggest about the cost of a WRX conversion plus the cost of the motor rebuild.Mick058 wrote:Price wise i reacken 2-3k
if you were really serious about putting one in a dub, I'd buy a late type 3 (cheap and legal) and put a 13b turbo in it. the fella in QLD with the 20b kombi has one for his missus apparently. I reckon you'd be nuts to use one without the turbo. the turbo makes a rotary far more usable.
"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/
http://drivingnotpolishing.blogspot.com.au/
Mick058 Custom Title Time!
1,580 posts · joined Jan 2008 ·
ha, like anything PEte, depends how fast and how well. I did it under 2k, i was 17 and poor. IT worked, wasn't the best, but it did work.
Did all the work myself and bought second stuff, got it rebuilt, re-cord etc.
Did all the work myself and bought second stuff, got it rebuilt, re-cord etc.
13BVW Seriously Crusin Dubber
151 posts · joined Sep 2005 ·
I have a 13bt in my car (the one Wes is talking about earlier) it was built OS and was a personal import that is how it is registered, its been on the road with a rotary for 20 years this year and with me behind the wheel for the last 12.
As for reliability mine has had a hard life it is now 23 years old and still going strong.
As for fuel economy with general cruising mine gets better econ then my old 1835(EFI helps) but it does like a drink when the pedal is to the floor.
They are such a compact engine that they fit beautifully and very smooth and revvy.
I have another rotary powered car and it cost 3k to get the engine rebuilt with new parts (seals, oil control rings rotors etc)
The gearbox is worst bit(they break with abuse) but you will get that even with a subaru or vw motor putting out the same power.
Do it, I hated rotary's initially due to hearing of all the myths but am now glad I took the plunge 😂
As for reliability mine has had a hard life it is now 23 years old and still going strong.
As for fuel economy with general cruising mine gets better econ then my old 1835(EFI helps) but it does like a drink when the pedal is to the floor.
They are such a compact engine that they fit beautifully and very smooth and revvy.
I have another rotary powered car and it cost 3k to get the engine rebuilt with new parts (seals, oil control rings rotors etc)
The gearbox is worst bit(they break with abuse) but you will get that even with a subaru or vw motor putting out the same power.
Do it, I hated rotary's initially due to hearing of all the myths but am now glad I took the plunge 😂
13BVW 11.80@114mph
Boozo Back in the bug
359 posts · joined Sep 2007 ·
woot, yay for 2 rats in a tin can. love the noise. non turbo would be more than enough for a street car. ive been thinking about doing this when and if i ever kill my 1916.
i was thinking 13b injected, but in light of the RTA restrictions the 12a might be an easier and most painfree option here in QLD.
Ive seen the mentioned yellow max at jambos for years, love it, its so quiet smooth and fast, beautiful 🙂
i was thinking 13b injected, but in light of the RTA restrictions the 12a might be an easier and most painfree option here in QLD.
Ive seen the mentioned yellow max at jambos for years, love it, its so quiet smooth and fast, beautiful 🙂
'59 or Kombi?....feeling confused
'59 bug
'68 bug
'82 import T3 BUS. aircooled
'59 bug
'68 bug
'82 import T3 BUS. aircooled
veedubman Learner Dubber
2 posts · joined Jan 2009 ·
mmm yea i was thinking either the 12a or the 13b
but i was also thinking maybe an EJ20
but id need a new gearbox to aye
but i was also thinking maybe an EJ20
but id need a new gearbox to aye
pete wood 23 Windows of Awesome
6,828 posts · joined Jan 2004 ·
a stock lbug box will cope with a non turbo EJ20. I'd have thought it would also be ok behind a 12a or 13b atmo motor. it's the torque of the turbo engines that kills them.
"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/
http://drivingnotpolishing.blogspot.com.au/
newghia stock is for people who cant think outside the square
679 posts · joined May 2008 ·
Just do it !!!
Built my first car, a beetle, for a rotary in the late 80's / early 90's
louvered the bonnet in prep for the radiator etc,
sanded the body by hand for too many weekends,
sadly never got there (with the engine )........still regret selling & not finishing that car🙁
Built my first car, a beetle, for a rotary in the late 80's / early 90's
louvered the bonnet in prep for the radiator etc,
sanded the body by hand for too many weekends,
sadly never got there (with the engine )........still regret selling & not finishing that car🙁
Step up to get out !!!
VWCOOL 23 Windows of Awesome
5,158 posts · joined Jun 2003 ·
wow veedubman, you say you been searching for days... this thread is from 2003
Pay your debts, CxxT
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
my black bug had a stock DC type3 box that was fine for years with a 13B
no offense to the wankel lovers but i couldnt wait to get that engine out and an EJ in
unless ur a die hard rota fan EJs are a far more logical choice
no offense to the wankel lovers but i couldnt wait to get that engine out and an EJ in
unless ur a die hard rota fan EJs are a far more logical choice
Euro_67 Wolfsburg Wizard
690 posts · joined Oct 2003 ·
Joel,
what was it about the rotary you disliked ? The EJ engines appear to be far more work to fit into a beetle than rotary due to size.
what was it about the rotary you disliked ? The EJ engines appear to be far more work to fit into a beetle than rotary due to size.
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
depends which EJ
NA sohc engines fit in with minimal effort and cutting
i agree with u that rotarys are a nice little compact engine
the only cutting to mine was the valance for the old fan hub clearance
but maybe ive never been exposed to a good rota but to me they are rediculously thirsty, not a smooth engine and noisy as no matter what u do to them
but my main dislike is the way they disrupt the handling
i love pushing cars hard thro corners and ive found and many other too that as soon as u chuck in anything other than a horizontally opposed banger u upset the center of gravity with a bug
got me buggerd how these guys running twin cam VW and toyota motors can still corner without stopping to grab 1st gear
NA sohc engines fit in with minimal effort and cutting
i agree with u that rotarys are a nice little compact engine
the only cutting to mine was the valance for the old fan hub clearance
but maybe ive never been exposed to a good rota but to me they are rediculously thirsty, not a smooth engine and noisy as no matter what u do to them
but my main dislike is the way they disrupt the handling
i love pushing cars hard thro corners and ive found and many other too that as soon as u chuck in anything other than a horizontally opposed banger u upset the center of gravity with a bug
got me buggerd how these guys running twin cam VW and toyota motors can still corner without stopping to grab 1st gear
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
i should also add that electrical wise i guess rotas are nice and simple to espeically if carb'd
that was the biggest hold up with my conversion was the amount of electrical bullshit involved with EJs
but to my way of thinking subis are a modern more refined engine smooth as, economical and cheap to get parts for
be that as it may my Lbug will always stay vw powered as its never been rusted, welded or in a prang so i dont have the heart to cut it up
that was the biggest hold up with my conversion was the amount of electrical bullshit involved with EJs
but to my way of thinking subis are a modern more refined engine smooth as, economical and cheap to get parts for
be that as it may my Lbug will always stay vw powered as its never been rusted, welded or in a prang so i dont have the heart to cut it up
ian.mezz I never said, I could write or spell
3,913 posts · joined Sep 2004 ·
you wuss , you need to go to the dark side, the Subaru turbo is so much fun , the acceleration over 100Ks is scaryJoel wrote:i should also add that electrical wise i guess rotas are nice and simple to espeically if carb'd
that was the biggest hold up with my conversion was the amount of electrical bullshit involved with EJs
but to my way of thinking subis are a modern more refined engine smooth as, economical and cheap to get parts for
be that as it may my Lbug will always stay vw powered as its never been rusted, welded or in a prang so i dont have the heart to cut it up
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲
Euro_67 Wolfsburg Wizard
690 posts · joined Oct 2003 ·
Funny ones recollection of things.
My first car was a Honey Brown Superbug. It leaked almost more oil than I could top it up with, and was just plain awful. Thankfully this didnt turn me of VWs completely, but it came close. It did lead me to work part time at a local VW workshop, after the engine finally died.
My mate's firs car was a very tidy RX4 coupe, complete with factory 13B and 5 Speed. I went for a drive, and couldnt believe how smooth the engine was, and how quickly it revved.
I have never driven a rotary engined beetle, so cant comment on the potential to change the handling characteristics.
A properly sorted rotary conversion offers a good power gain, with minimal body mods and plenty of room to spare. I think the handling could be an issue, regardless of engine choice (Rotary or EJ) and would need sorting out to suit the final weight / distribution.
I remember the first Rotary engined Beetle I saw (the Penrose one I think, with suicide doors) driving into an indoor VW show at the old Enfield motor auctions, and the noise and scene it caused (13b Bridge Port) with the purists and modders alike turning their noses up in disgust.
My first car was a Honey Brown Superbug. It leaked almost more oil than I could top it up with, and was just plain awful. Thankfully this didnt turn me of VWs completely, but it came close. It did lead me to work part time at a local VW workshop, after the engine finally died.
My mate's firs car was a very tidy RX4 coupe, complete with factory 13B and 5 Speed. I went for a drive, and couldnt believe how smooth the engine was, and how quickly it revved.
I have never driven a rotary engined beetle, so cant comment on the potential to change the handling characteristics.
A properly sorted rotary conversion offers a good power gain, with minimal body mods and plenty of room to spare. I think the handling could be an issue, regardless of engine choice (Rotary or EJ) and would need sorting out to suit the final weight / distribution.
I remember the first Rotary engined Beetle I saw (the Penrose one I think, with suicide doors) driving into an indoor VW show at the old Enfield motor auctions, and the noise and scene it caused (13b Bridge Port) with the purists and modders alike turning their noses up in disgust.
froger Casual Dubber
49 posts · joined Sep 2008 ·
I have a complete 12a motor , adaptor plate , flywheel , exhaust , motor doesn't turn, was supposed to have been running a couple of years ago but old mate lost interest in the project and let it sit in the car and never turned it over , $500.00 If interested PM me
bugzla Custom Title Time!
1,164 posts · joined Jun 2007 ·
as mick said its all about placement of the radiator and oil cooler ducting and so on my car is still up for grabs just if your interested look in members cars for some pics let me know if there are any more questions ............
steve
steve
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
The Wankel engines use too much fuel....Euro_67 wrote:what was it about the rotary you disliked ? The EJ engines appear to be far more work to fit into a beetle than rotary due to size.
that was the main problem with them....
along with seals...
I don't know if they ever really fixed the seal problems...
the subaru engines are a modern technolegy engine
thats why they are used so much...
even with all the hassles...
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
ttriebler Officially Full-On Dubber
321 posts · joined Jan 2008 ·
Of course they did, they are selling the RX8 aren't they?68AutoBug wrote:The Wankel engines use too much fuel....Euro_67 wrote:what was it about the rotary you disliked ? The EJ engines appear to be far more work to fit into a beetle than rotary due to size.
that was the main problem with them....
along with seals...
I don't know if they ever really fixed the seal problems...
the subaru engines are a modern technolegy engine
thats why they are used so much...
even with all the hassles...
And note the Rehayem's (Pac Racing) are turning out 1000+hp methanol turbo motors - I reckon they might have the seal thing worked out.
I know drag racing is only for 7 secs.
South Coast Rotary make a very good aftermarket seal that apparently gets revs to around 13,000rpm and has some awesome longevity - so the seals really aren't an issue anymore.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com