voltz Seriously Crusin Dubber
119 posts · joined Sep 2004 ·
is there any adaptor fitting to change the fuses from those crappy ceramic type to the blade type fuses ?
Ceramic fuse replacement
Bizarre Moderator The artist formerly known as blue74l
12,785 posts · joined Aug 2002 ·
Yep - its is called time, effort and money.
Sorry Voltz, the only way is to get the pliers and wires out and find a donor fuse box from some where and start wiring.
Guess if you made the box up and then soldered the extension wires onto the tabs, it wouldnt be THAT hard
Sorry Voltz, the only way is to get the pliers and wires out and find a donor fuse box from some where and start wiring.
Guess if you made the box up and then soldered the extension wires onto the tabs, it wouldnt be THAT hard
Futue te ipsum!!!
mnsKmobi Wolfsburg Wizard
589 posts · joined Aug 2002 ·
No offence but anything other than making sure you've got the right amp fuses in the right holes and brightening up the contacts with a bit of fine sandpaper is probably a low priority...
voltz Seriously Crusin Dubber
119 posts · joined Sep 2004 ·
found a pre made fuse box from auto electrician today, holds 6 blade type fuses,Im going to use that, should be nice and easy