Aussieveedubbers

Seam sealer first or primer ?

0 likes

1303 Officially Full-On Dubber

250 posts · joined Sep 2003 · 15 May 2005, 5:23 pm

#356661

I have done a little work beefing up the area behind the back seat of my beetle. I removed alot of the old seam sealer so I could weld gussets and some 200mm x 200mm x 2mm shaped steel plates on each side.

Will I need to apply seam sealer prior to primer or vice versa?

I was just going to spray on etch primer after seam sealer until I get it resprayed.

Cheers Paul.

killakornkobb where's that clutch?

1,663 posts · joined Mar 2004 · 15 May 2005, 6:19 pm

#356691

etch prime, then seam sealer, then primer before colour... allow 25-30 mins for seam sealer to go chewy before applying 1 coat of high solid 2k primer, allow flash off, and paint colour.. no sanding of the 2k primer 🙂

Tagedeezee Heezy