Will 40mm Dellorto's off a alfa romeo fit a 2ltr motor
what else will I need to make them work ,eg. manifold, linkages etc.it is 2nd hand and unseen as yet
sand kombi Officially Full-On Dubber
345 posts · joined Feb 2003 ·
dellorto\'s carbies
Bizarre Moderator The artist formerly known as blue74l
12,787 posts · joined Aug 2002 ·
A 2L T4?
you will need T4 manifolds (same as IDF 36,40,44)
Air cleaners
Linkage.
Gaskets
Maybe vents
Definetely jets
They need to be restudded. The Alfa only has 2 studs for the air cleaner so you will need the extra ones put in.
They also have a choke mechanism the needs disconnecting if going on an upright motor cause it interferes with the shroud.
You sure the are DRLA 40's - just unusual
Mostly DRLA 36's or IDF's- still should be ok though
you will need T4 manifolds (same as IDF 36,40,44)
Air cleaners
Linkage.
Gaskets
Maybe vents
Definetely jets
They need to be restudded. The Alfa only has 2 studs for the air cleaner so you will need the extra ones put in.
They also have a choke mechanism the needs disconnecting if going on an upright motor cause it interferes with the shroud.
You sure the are DRLA 40's - just unusual
Mostly DRLA 36's or IDF's- still should be ok though
Futue te ipsum!!!
sand kombi Officially Full-On Dubber
345 posts · joined Feb 2003 ·
thanks heaps for the info. still seems to need a lot to get them going but getting bits slowly it should be to bad
As to the 40mm size thatis just what the ad said,what is the 40mm/36mm ,just the throught width or something else,and is it marked
As to the 40mm size thatis just what the ad said,what is the 40mm/36mm ,just the throught width or something else,and is it marked
1 attachment · Log in to view
sand kombi Officially Full-On Dubber
345 posts · joined Feb 2003 ·
other side
1 attachment · Log in to view
Bizarre Moderator The artist formerly known as blue74l
12,787 posts · joined Aug 2002 ·
Have you bought these?
Something dont seem right. Are you sure they are not DHLA's ie side draft?
The carbs i have seen have a flat top not a flange at both ends.
Sorry .... it is hard trying to visualise at the office.
The red stuff dont look familiar either
Something dont seem right. Are you sure they are not DHLA's ie side draft?
The carbs i have seen have a flat top not a flange at both ends.
Sorry .... it is hard trying to visualise at the office.
The red stuff dont look familiar either
Futue te ipsum!!!
sand kombi Officially Full-On Dubber
345 posts · joined Feb 2003 ·
I dont know they are on ebay, thought a few people would know alot more about them as I don't know what to look for
BiX Veteran Volks Folk
2,499 posts · joined Sep 2002 ·
They don't look like the 40mm dells I run. Blue mite be rite, sure they are side draught?
Bizarre Moderator The artist formerly known as blue74l
12,787 posts · joined Aug 2002 ·
Pass on em mate.
You can do better here in Australia.
Give Alfabits a call and see what they have
What state are you in?
You can do better here in Australia.
Give Alfabits a call and see what they have
What state are you in?
Futue te ipsum!!!