Have off my 71 Fastback, complete brake set up (front dics, rear drums and associated bits) and master cylinder. Calipers, brake lines and wheel nuts also included. Only thing needed would be the locking nuts for the front stub axles.
Good condition.
Pick up from Annandale. Asking $150
[ Edited on 19-3-2006 by GTMac ]
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
Anybody, make a reasonable offer and they are yours.:repuke
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
OK, $100 otherwise they sit in milk crate under the house for a rainy day.
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
are the calipers the type with the bolt holes closer together? (the earlier style)
Good question. Off a 71 model so cant remember but will check and advise.
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
Bus914, you have U2U.
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
Not sure what meat should be on a standard rotor but I have measured and both are at about 10mm thick. All I can say is they never shuddered and pulled up fine and thus assume are not warped etc.
1971 Type 3 Fasty - EJ20T
I love 242HP sleepers. 🤪
How many sets of lights does it take a $229k Carrera S to learn? 😂 UPDATE: Cayman S, M3, B4 now added to the list.
if there off a 71 then they are the smaller front calipers they bigger calipers only came out on very late 72 and 73 models
