Engineering Shop Wanted

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 21 Mar 2006, 12:29 pm

#466457

I need someone with a hydralic press to get the balljoints out of my trailing arms off a kombi and new ones back in again, i am also looking to getting the colars reamed by about 7mm. anyone point me to an engineering shop

Anyone know anywhere around parramatta or leichardt.
or anywhere between those two. As I work and live at the other

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 · 22 Mar 2006, 7:16 am

#466576

Vintage at Campsie can do the pressing for you 9789-1777

I read it on FACEBOOK so it must be true

http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630

http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099

http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603

http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

glider69 Fahrvergnugen

954 posts · joined Sep 2004 · 22 Mar 2006, 8:48 am

#466603

definite dimension engineering
13/29 helles ave
moorebank 2170
98228374

you know where it is lloyd

1500S Custom Title Time!

1,418 posts · joined Mar 2005 · 22 Mar 2006, 10:05 am

#466628

Send me U2U and I'll give you a phone number to call me. Located at Meadowbank just down the road and may be able to help.

DH

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 22 Mar 2006, 6:21 pm

#466762

many thanks for all the replies, meadow bank by bike might be easiest ;-)

many thanks

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71

1500S Custom Title Time!

1,418 posts · joined Mar 2005 · 22 Mar 2006, 8:59 pm

#466825

U2U sent. Give me a call tomorrow sometime 8 am to 4.30 pm.

DH

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 22 Mar 2006, 9:18 pm

#466837

glider69 wrote:definite dimension engineering
13/29 helles ave
moorebank 2170
98228374

you know where it is lloyd

yep, guy place to go.

Beerboy Custom Title Time!

1,030 posts · joined Jul 2004 · 22 Mar 2006, 10:29 pm

#466876

certainly is just a bit too far with kombi ball joints on my back on a pushy ;-)

WANTED kombi drivers side rear corner for a early bay! found after six years lol
WANTED engine lid for early kombi 71