Skip to content
Aussieveedubbers

Hot tank --> TriSodium Phosphate wtd

0 likes
Share Share on Facebook Share on X Share on Reddit

matara Custom Title Time!

1,342 posts · joined Aug 2002 ·

#471192
I am rebuilding the twin carbs on a 65 Notch, and I am wanting to build a hot tank so I can clean the parts.

I need to buy some TSP Trisodium Phosphate, and I was wondering if anyone knows where you can buy it from.

Thanks

Steve

toplessbug Fahrvergnugen

879 posts · joined Aug 2002 ·

#471454
rob n dave did a thread on a carb cleaner that works very well (,i used it its good,) if you cant find tsp:beer
Don't argue with an idiot; people watching may not be able to tell the difference.

PurpleT3 Fahrvergnugen

880 posts · joined Apr 2003 ·

#471461
As far as I know, TSP will corrode alot of metals, especially reactive ones like aluminium alloys. If you place alloy in a hot TSP solution it will darken considerable and start to corrode very quickly.

If all you want to do is clean carbs, I can recommend Nulon Carb & Throttle body cleaner. I used it on my fastys carbs and it cleaned off all the stains in minutes. It also cleans up just about anything else. It is a bit expensive at $12 a can, but it works really well and doesn't hurt aluminium.
Ain't nothin' like the wind in your hair.

ctefeh Wolfsburg Wizard

479 posts · joined Apr 2005 ·

#471474
I'll second the Nulon carb cleaner. That or CRC. They are pretty similar and it comes down to price really. I've been using these on various carbs for donkey's years.

The other good thing about the can jobs is they also flush jets and passages really well.

Enjoy
Ctefeh

66deluxe Custom Title Time!

1,593 posts · joined Aug 2005 ·

#471592
Nulon is the best and smells like bubble gum, that cheap carb cleaner is just awful. As for trisodium phosphate try ARDROX chemical company, located in Girraween NSW. We use their products to clean Gasturbine engine parts where i work, goes in black comes out shiny in less than 10 minutes. Cheers Damien.

[ Edited on 4-4-2006 by 66deluxe ]
This is my Volkswagen, there are many like it, but this one is mine. Without me my Volkswagen is useless, without my Volkswagen, I am useless.

61 Karmann Ghia 2110cc type1 w Los Panchito's
66 Deluxe Beetle 2270 type 4
10 Subaru WRX Impreza

koolkarmakombi enkarmarising

2,078 posts · joined Jun 2003 ·

#471604
what are the turbine bits made of 66d?
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied

barls Administrator Causer of Chaos and Mayhem

9,475 posts · joined Jun 2004 ·

#471625
i use chlorinated tsp as a sterilizer for my brew gear its known as psr at the country brewer
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me

66deluxe Custom Title Time!

1,593 posts · joined Aug 2005 ·

#471993
koolkarmakombi wrote:what are the turbine bits made of 66d?

Turbine parts, depending on which component are made from either titanium, nickel alloys, inconel, magnesium, aluminium, stainless steel, and the parts cost heaps eg, A magnesium reduction gear box case half can cost around $30000 and it is smaller than a type 1 crankcase, so don't ever buy an aircraft, cheers Damo.
This is my Volkswagen, there are many like it, but this one is mine. Without me my Volkswagen is useless, without my Volkswagen, I am useless.

61 Karmann Ghia 2110cc type1 w Los Panchito's
66 Deluxe Beetle 2270 type 4
10 Subaru WRX Impreza