Aussieveedubbers

Wanted - IRS Control Arm (Drivers Side) - Brisbane.

0 likes

MikeM Buggy Head

1,429 posts · joined Aug 2003 · 28 Apr 2006, 11:33 am

#481415

Hi All,

Turns out my drivers side IRS Control Arm is bent. Only a little bit bent (I didn't look bent until I bolted it to the car) but it's bent enough to completely bugger the camber on the driver side rear wheel.

So I'm after an IRS control arm for the drivers side rear. Can be bare, no brakes, axle etc. Or complete.

I'm in Brisbane
U2U is best.

Support BuggyFest sponsors
http://www.shannons.com.au/
http://www.crankykits.com.au/
http://www.customveedub.com.au/
http://www.ozbuggies.com.au/

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 · 28 Apr 2006, 2:09 pm

#481482

Are you sure its bent??? I can change the camber by up to 4 deg without any problems, but there is a trick to it !!