Skip to content
Aussieveedubbers

weird noises & problems with 1971 T3

0 likes
Share Share on Facebook Share on X Share on Reddit

jonjon86 Commited Dubber

50 posts · joined Apr 2005 ·

#523367
Hi everyone.

I've had a few problems for as long as I can remember and I was wondering if anyone has had the same problem.

no.1
My steering wheel's centre position changes all the time.
In other words, something happens when car hits a bump or I turn tightly to move the steering centre point.
This only happens when the car is under increased loading whils't cornering.
Has anyone had the same problem? I've been to 3 different vw servicing shops and no one has fixed it.

no.2
My rear CV joints or something else in the back of the car make clunking noises when my car goes over any bumps or undulations in the road. My rear wheels also have a lot of play within either the CV's or diff.
By that I mean that if the car is jacked up and in gear, one wheel will almost fully revolve before the other one is even engaged.

Can anyone help me?

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#523558
Jono. Can you give me a call re a heap of bits you may need. Been busy getting ready for OS trip.

work 99423640

DH



[ Edited on 17/8/2006 by 1500S ]

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#523562
the steering is possible the bolt holding the steering rod to the output shaft on the steering box its suspost to have a lock washer on it and will cause yr wheel to moove when going round a corner

The rear end is possible your trailing arms rubber bushes they need replacing

or the rear engine support check and see if its cracked around the body work on eitehr side of the engine bay and that the 3 attach bolts are tight
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

DallanMulley Seriously Crusin Dubber

145 posts · joined Apr 2004 ·

#523743
With that much movement I would be looking at your diff.CV's will not give that amount of play.

jonjon86 Commited Dubber

50 posts · joined Apr 2005 ·

#525475
thanks guys, i'll look into all of that tomorrow

Any more suggestions?

1500S Custom Title Time!

1,418 posts · joined Mar 2005 ·

#525602
When you see Trent he may part with the gearbox out of the one he has. Not sure what it was like but may be useable.

DH