Skip to content
Aussieveedubbers

My 54 Beetle's Steroid 36hp.....now running!

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#611124
pod wrote:Craig, does your carb setup run a balance tube between or isnt it necessary??
Yep runs a balance tube.


Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#611125
pod wrote:Craig can you post some pics of the middle linkage setup, is it from a type 3?? thanks
Yep its a modified middle section from a type 3 and the cross bar is from a twin Kadron setup. Its not ideal, but it was enough to get the car driveable.

I will get some pics during the week :thumb


vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#611144
yeah its beter if you run a balance tube
much easier to tune and runs smoothier
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#782852
so should I put a set of Porsche Twists on this puppy and slam it ? !


reub VWRX is gone...

2,054 posts · joined Sep 2002 ·

#782854
Here is a cool 36hp...



http://www.youtube.com/watch?v=YbJr_zlifeM

1192cc 36hp with single port heads (35,5mmx32mm) with blower.
Cam
intake 282° 11,9mm valvelift
exhaust 290° 12,3mm lvalvelift
112° lobe messured at 0.018"
Reub