What type of grease do I use?

Yogie Moderator Custom Title Time!

1,609 posts · joined Jun 2003 · 5 Nov 2006, 8:31 pm

#552603

I have a 72 super beetle with IRS rear end. I will be fitting new rubbers in to where the swing arms attach to the pan and also for the torsion tubes. What type of grease/lubricant do I use to fit them and is there anything I need to be aware of when I fit them?

Thanks

Yogie

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 · 5 Nov 2006, 9:38 pm

#552641

No grease at all!

All you have to do is make sure the metal of the spring plates' tube section is clean and smooth

Pay your debts, CxxT

Yogie Moderator Custom Title Time!

1,609 posts · joined Jun 2003 · 6 Nov 2006, 8:22 am

#552747

Thanks VWCOOL. I thought they squeaked if you didn't lube them with something?

Yogie

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 · 6 Nov 2006, 1:03 pm

#552842

Manual says to use powdered chalk....

on the outer surface to get it in easier....

nothing on the inner turning surface...

I would have thought rubber grease would have been OK

help stop the rubber wearing too...

Lee

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

cesiumfrog Seriously Crusin Dubber

161 posts · joined Apr 2005 · 6 Nov 2006, 1:13 pm

#552845

thats assuming rubber bushes..
if you use nolathane type bushes you need to put plenty of grease otherwise they will squeak
i used moly grease on mine and no noise.

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 · 6 Nov 2006, 2:14 pm

#552864

cesiumfrog wrote:thats assuming rubber bushes..
if you use nolathane type bushes you need to put plenty of grease otherwise they will squeak
i used moly grease on mine and no noise.

Did you have any problems installing the Nolathane bushes?

Yes, Moly is the BEST in grease.... Only one to use..

Lee -- 68AutoBug

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

cesiumfrog Seriously Crusin Dubber

161 posts · joined Apr 2005 · 6 Nov 2006, 3:29 pm

#552883

no problems with the nolathane (or whatever they are)
other than first time i used them with the grease supplied and squeaked heaps...so bad i took them off and reinstalled with moly grease
if you mean ride..? possibly a little more shock transmitted...could be imaginary, but suspension seems to work better..i,m pretty sure thats not imaginary

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 · 6 Nov 2006, 5:02 pm

#552904

Grease attracts dirt which wears the (unsealed) bushes. I have custom-made Noltec bushes in my car - no grease required.

Pay your debts, CxxT

phil Seriously Crusin Dubber

128 posts · joined Mar 2005 · 6 Nov 2006, 9:30 pm

#552995

how does that work? no squeak?
i had thought of the dirt aspect and allway wipe any excess grease away to limit the accumulation...but

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 · 6 Nov 2006, 9:36 pm

#552998

phil wrote:how does that work? no squeak?
i had thought of the dirt aspect and allway wipe any excess grease away to limit the accumulation...but

yep, no squeak. No worries...

Pay your debts, CxxT

Yogie Moderator Custom Title Time!

1,609 posts · joined Jun 2003 · 7 Nov 2006, 10:16 am

#553110

I have rubber bushes for the rear but nylon? ones for the front end. So should I use Moly on the front and just dust the rears?

Yogie

VWCOOL 23 Windows of Awesome

5,158 posts · joined Jun 2003 · 7 Nov 2006, 10:51 am

#553123

Yogie wrote:I have rubber bushes for the rear but nylon? ones for the front end. So should I use Moly on the front and just dust the rears?

Yogie

Yep. The front ones aren't actually bushes, just grease seals

Pay your debts, CxxT

Yogie Moderator Custom Title Time!

1,609 posts · joined Jun 2003 · 8 Nov 2006, 12:11 pm

#553476

OK. Thanks for the help guys.

Yogie