hey there,
i just got my central locking kit.... looked at it and my doors but i got no idea where to install the acurator. any pictures or advicce would be good. the only way i see it is to cut a small whole.
and what sort of vehicle are you trying to fit them to bud?
yeah more info what model and year would be a help
its much easier if you have a leter car with push button locks
keep on forgetting not every one knows my beetle :Phttp://forums.aussieveedubbers.com/images/smilies/tongue.gif
it's a 1969 1500 ....
the rod is behind the sheet metal of the door. do i have to cut it or is there an other way?
Spent a few hours trying to do it without cutting a hole on the first bus i did, its pretty much impossible because you will have to clamp on the clamp then twist it not really tight enough if you can twist it.
I just drilled two holes with the hole saw bit for a drill, that was on the first door because i didnt quite get the allignment right, 2nd door was only one small hole.
If you drill the hole/grind out a hole it makes installing the kit a breeze, took me about 15mins to install each actuator on my 2nd bus.
[ Edited on 1-3-2007 by 76camper ]
cool so i'm not making any mistakes putting holes in my doors. i actually started my first door. that was easy just wanted to make sure i wasn''t destroying my car for nothing.
It should be possible to keep the holes just large enough to fit the end of a screwdriver through, assuming you can reach around to hold the clamp in place while you do it up. That's how I did my kombi anyway.
Kruizin Kol
Hey Learner
What brand of kit you using?
Interested in doing it to mine down the track.
Richard
i'm using mess accurator. they are swiss made and so far the best i have seen (pretty strong good for old mechanisms) check out a1electrics.com they have info on it. they also caree a power window kit for beetles.
sorry about the similar posts they were posted when the server was going through a hard time.
like i said i cut a whole through the door and all was installed in 20 mins. add another 20 mins and i had my
remote central locking kit installed. ( and i know nothing about auto electrics)
pretty proud of myself. the only problem is that i probably wired one of the remote console improperly as now i have no sound through my speakers. but it would be an easy fix
next step is to customise my door panels and slowly work my way through making kickpanels out of fiberglass.
