Aussieveedubbers

[FS - WA] Go Gear (New prices)

HOODWINK · 2007-08-24T03:30:00+00:00

More stuff I'm getting rid of; Pair of Reconditioned Heads, Mild Port Job with SS Valves, Heavy Duty Springs and shim kit to suit 94mm Bore - $300 Set of 94mm Cima/Mahle Pistons and Cylinders in the box - $350 VW Case Prepared for 94mm Cans - $OLD 69mm Counter waited crank and balanced VW conrods - $300 Garrett GT2860R (used, small amount of end play) without actuator - $500 this was all going to make a moderate (180hp) draw-through turbo setup... the turbo is a Ball bearing model from a GTR skyline and would produce SCARY throttle response, The case is the weakest link but would be good for about 12PSI, which should deliver 180hp at about 6000RPM? Have some of the seals hardware. Post up a message or call; Evan - 0418 864 868 I will post pics tonight [ Edited on 30-8-2007 by HOODWINK ]

0 likes

HOODWINK Commited Dubber

53 posts · joined Mar 2007 · 1 Sep 2007, 12:33 pm

#609660

this is the base for a great 1915, anyone?

HOODWINK Commited Dubber

53 posts · joined Mar 2007 · 4 Sep 2007, 11:10 am

#610159

the turbos going on ebay, the crank is being put away for a 1500, but the P's & C's are still up for grabs, and the heads as well, anyone?