Skip to content
Aussieveedubbers

CRO-MOLY DROP SPINDLES-drum or disc .

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

RodPenrose Insano Dub Head

792 posts · joined Apr 2005 ·

#627324
I now have in stock forged cro-moly drop spindles to suit K&L and BJ front suspensions priced @ $ 300 a set . These are only available to suit drum brakes so it is necessary to use a bolt on bracket to use a disc and caliper. These will lower the front end by 2 1/2'' without changing any suspension geometry and can be used with any type of tie rod end mounted on the top or bottom. These spindles are forged and are much stronger than the cast units currently available , ROD , 02-42729920............I have a shippment of these cro-moly drop spindles arriving in the next few weeks to suit disc brakes . The first order got stuffed up and only the drum brake units arrived , ROD.
More boost + More fuel = More power
1968 Beetle fastest run 8.96 sec @ 161 mph 4th Nov. 2001
2010 New Beetle 8.12 sec on 8th march 2014
http://www.rodpenroseracing.com.au

11CAB If ya got it....Baja it

4,674 posts · joined Aug 2002 ·

#627336
If only it was that easy to get raised spindles.....🤪
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab

ancientbugger Custom Title Time!

1,986 posts · joined Mar 2004 ·

#627375
Turn 'em upside down!😂

1SlowBeetle Commited Dubber

56 posts · joined Sep 2007 ·

#627670
I'm a bit of nube, so why can't we get them for disk? Why make a nice part like this and then use drums?

Do you have the brackets for disks?
59 bug w 1916cc

OZ Towdster Keen to finish some projects

1,921 posts · joined Dec 2003 ·

#627674
Yes Rod can also do you a deal on a wide 5 (Your early stud pattern) Disc brake kit that will bolt straight on to these stub axles.
Give him a ring , as he's great to deal with and will give you some tips for your 1916 no dought
Don't let body work get in the way of real suspension travel

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#627679
1SlowBeetle wrote:I'm a bit of nube, so why can't we get them for disk? Why make a nice part like this and then use drums?
You can.
The market in Australia is a fraction of what it is in America.
Rod brings stuff in.

Sadly we dont have the luxury of AC.net, CB, Berg, CIP1, Rocky Mountain etc etc

This time he has brought in dropped spindles for drums
Futue te ipsum!!!

1SlowBeetle Commited Dubber

56 posts · joined Sep 2007 ·

#627717
The smaller market is a bit of a pain, but so it trying to deal with the US. It is good that people like Rod go to the effort of importing to benefit the likes of us.
59 bug w 1916cc

fullnoise Fahrvergnugen

964 posts · joined Sep 2002 ·

#627858
These have to be better than the cast CB Performance junk.

I had the CB ones until some scrutineers at a supersprint showed me how the arm that goes to the tire rod flexed by hand.

It make a lot of sense to lower the car but keep the steering arms close to the factory angle. That way you still get suspension movement and a compliant front suspension.

I uses the welded stock ones from Custom Bugs and Busses. The're great. But sadly they don't make them anymore.

My 2 cents. CT
esratrams

botcolon Commited Dubber

64 posts · joined Oct 2006 ·

#627966
apologies for this but would this suit early bays? (e.g 1970)

botcolon

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#628008
botcolon wrote:apologies for this but would this suit early bays? (e.g 1970)

botcolon
Sorry No luck.. botcolon
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

1SlowBeetle Commited Dubber

56 posts · joined Sep 2007 ·

#631256
For anyone who's interested. I just bought a set of these yesterday. They will go on this arvo and look to be a very good piece of kit. They are one piece (not welded together like some) and a really good cast. They are also set up for new or old tie rod ends and they can go up or down.

Highly recommended gear.

Cheers,
1Slow
59 bug w 1916cc

xornge666x Wolfsburg Wizard

460 posts · joined Sep 2006 ·

#631565
i take it these are the ones airkewld are selling??