Skip to content
Aussieveedubbers

Part numbers for 36HP?

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

Pastit Seriously Crusin Dubber

150 posts · joined Feb 2008 ·

#634928
Got a few bits and trying to see what zackery they are

Camshafts underneath the number 113.109.111A
is 320H
15H
20H
H1E
17H
3
Any of these 36 HP one's?

And heads under the number 111 101 371A
is 371A
39
27
16
5
Any of these 36 HP one's as well?

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#634931
Heads and cams in 36 hp are obviously smaller in size, should be easy to tell.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#634942
the 36hp heads usually havea steel insert in the spark plug hole / thread also where the rockers bolt on the rocker saddles are sunken and not flat allowing half of the rocker shft to sit into the head if that makes sense

the 36cams are shorter than the 1200 and 1600 engines
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#634945
Hi

36 hp stuff usually has a 111 xxx xxx part number. 36 hp cams have shallower bevel on the gears than 40 hp - 1600 ones. The the top cylinder head nut hole on 36 hp heads enclosed.


Steve

Pastit Seriously Crusin Dubber

150 posts · joined Feb 2008 ·

#634991
The 27 and 39 heads have recessed top cylinder bolts and have the half recessed tappet mounts.

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#635010
are u selling or trying to build an engine ???

where r u located
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

Pastit Seriously Crusin Dubber

150 posts · joined Feb 2008 ·

#635188
vw54 wrote:are u selling or trying to build an engine ???

where r u located
Niether at the moment, just going through a shed full of stuuf to see what I've got.