shaihulud Custom Title Time!
1,448 posts · joined Nov 2005 ·
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
shaihulud wrote:I need to know which way the little plate at the bottom of the conical coil spring on a Type 1 gearshift goes in.
I have it with the slope on the right and going up to the front. I have no reverse lock out that way, so that must be incorrect.
What way is the correct way?
shaihulud Custom Title Time!
1,448 posts · joined Nov 2005 ·
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
id say that's the right way, just up side down........the lip should be on the "top side" of the plate when installed, (towards the drivers feet)shaihulud wrote:I need to know which way the little plate at the bottom of the conical coil spring on a Type 1 gearshift goes in.
I have it with the slope on the right and going up to the front. I have no reverse lock out that way, so that must be incorrect.
What way is the correct way?
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
1 attachment · Log in to view
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
1 attachment · Log in to view
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
vw54 Administrator Always Waiting 4 Friday
16,723 posts · joined Aug 2002 ·
